? Explanation
  • add to Notepad
  • HTML-Datasheet
  • no Datasheet available
  • Productdetails as PDF

GLET-SG2K Active modular enclosure with 2 channel strain gauge amplifier

Active modular enclosure GLET-SG2K

Active modular enclosure for the connection of passive strain gauge transducers/sensors (bridge resistance more than 350 Ohm) in connection with a datalogger.

  • GLET-SG2K-BA2-BI7 for dataloggers of series GL220, GL800, GL820
  • GLET-SG2K-BNC-BI7 for dataloggers of series GL900

Specifications

  • Number of channels: 2
  • Potentiometers for zero and span adjustment
  • Strain gauge excitation: 5 VDC (max. 15 mA/channel)
  • Input sensitivity: 1 ... 3 mV/V
  • Limit frequency: 1 kHz
  • Connector for transducer: 7-pin connector (Binder, supplied with mating connector)
  • Analog output signal: 0 ... 10 V, ±10 V
  • Analog output rating: max. 1 mA
  • Electrical connection analog output to datalogger:
    GLET-SG2K-BA2-BI7: 2 mm jack
    GLET-SG2K-BNC-BI7: BNC
  • Supply voltage: 24 VDC ±5 % *)
  • Enclosure: desktop
  • Dimension without connectors (WxHxD): approx. 45 x 115 x 90 mm
  • Environmental sealing: IP20
  • Operating temperature range: 0 ... +50 °C

*) For voltage supply the datalogger’s AC-adapter can be used. The unit provides a jack for AC-adapter connection, as well as a datalogger supply cable (comparable to B-514). For use with multiple GLET units an additional AC-adapter is required.

Information in the PDF datasheet (see above) may be more detailed. Due to continual product development, ALTHEN and partners reserve the right to vary the foregoing details without prior notice.