|
|
Pressure / Differential Pressure – tactile Pressure Sensors – Load / Force – Torque – Linear Displacement – Rotary Position – Inclination / Tilt – Acceleration – Vibration – Rate – Amplifier and Signal Conditioner – Telemetry – Datalogger / Data Aquisition |
|
13FLP Linear-motion Potentiometer
|
|
Linear-motion Potentiometers are compact in size, light in weight and are capable of transforming mechanical linear movements into corresponding electrical variations. Easy to operate and handy, they are suitable for measurement of linear movements in various machinery and tools and displacements in linearly moving objects such as steering angles, numerical control tooling machines, robots, etc. The resistive element in this series is made of conductive plastic (FLP-A) which features high resolution, long life expectancy and excellent high speed tracking ability.
Standard Model Numbers
:: 13FLP12A stroke 12 mm
:: 13FLP25A stroke 25 mm
:: 13FLP50A stroke 50 mm
:: 13FLP100A stroke 100 mm
General Specifications
|
Model |
13FLP12A |
13FLP25A |
13FLP50A |
13FLP100A |
|
|
Standard Resistance Values: |
500 Ω, 1 kΩ, 2 kΩ, 5 kΩ, 10 kΩ |
500 Ω, 1 kΩ, 2 kΩ, 5 kΩ, 10 kΩ |
1 kΩ, 2 kΩ, 5 kΩ, 10 kΩ, 20 kΩ |
1 kΩ, 2 kΩ, 5 kΩ, 10 kΩ, 20 kΩ |
|
|
Total Resistance Tolerance: |
±20 % (M) |
||||
|
Independent Linearity Tolerance: |
Standard Class |
±2,0 % |
±1,5 % |
±1,0 % |
±0,7 % |
|
Precision Class |
±1,0 % |
±0,7 % |
±0,5 % |
±0,3 % |
|
|
Resolution: |
Essentially infinite |
||||
|
Output Smoothness: |
Below 0,1 % against input voltage |
||||
|
Contact Resistance Variation: |
Below 2 % C.R.V. |
||||
|
Power Rating: |
0,2 W |
0,4 W |
0,7 W |
1,2 W |
|
|
Electrical Stroke: |
12,7 ±0,5 mm |
25,4 ±0,5 mm |
50,8 ±0,5 mm |
101,6 ±0,5 mm |
|
|
Mechanical Stroke (MS): |
12,7 +3 mm |
25,4 +3 mm |
50,8 +3 mm |
101,6 +3 mm |
|
|
Insulation Resistance: |
Over 1.000 MΩ at 500 VDC |
||||
|
Dielectric Strength: |
1 minute at 500 VAC |
||||
|
Friction: |
Below 0,5 N (50 gf) |
Below 1,0 N (100 gf) |
|||
|
Stopper Strength: |
Approx. 20 N (2 kgf) |
||||
|
Resistance Temperature Coefficient: |
±400 ppm/°C |
||||
|
Mass: |
Approx. 10 g |
Approx. 15 g |
Approx. 25 g |
Approx. 35 g |
|
|
Resistive Element Type: |
Conductive Plastic |
||||
Environmental Performance
|
Operating Temperature Range |
-30°C…+105°C |
|
Temperature Cycle |
5 cycles under -30°C…+105°C Total resistance value variation: below ±10 % :: No mechanical damage |
|
Exposure at Low Temperature |
24 hours at -30°C Total resistance value variation: below ±5 % :: No mechanical damage |
|
Exposure at High Temperature |
1.000 hours at 105°C Total resistance value variation: below ±10 % :: No mechanical damage |
|
Vibration |
10 Hz to 2.000 Hz 147 m/s2 12 hours Total resistance value variation: below ±5 % :: No mechanical and electrical damage |
|
Shock
|
490 m/s2 11 ms 18 times Total resistance value variation: below ±10 % :: No mechanical and electrical damage |
|
Moisture Resistance |
40°C 95 %RH 120 hours Total resistance value variation: below ±10 % :: Insulation resistance: over 10 MΩ |
|
Life Expectancy, Shaft Reciprocating Motions
|
No load at 120 c.p.m., 20.000.000 reciprocating motions Total resistance value variation: below ±10 % against initial value Independent linearity tolerance: below 150% of specified value Output smoothness: below 150% of specified value |
Notes:
1. In case of the potentiometer with special resistance values and special specifications, the above performances may change and therefore, please consult us in advance, separately.
2. As for operating temperature range. we can not guarantee that all values of performances can satisfy within this operating
temperature range.
3. The above values of performances based on each testing were measured after each testing completed, respectively, under
standard conditions. As for the values during testing and other values not mentioning in the above table, please ask us separately.
Standard Dimensions
|
Model |
A |
B |
MS |
|
13FLP12A |
38 |
32 |
12,7 +3/-0 |
|
13FLP25A |
51 |
45 |
25,4 +3/-0 |
|
13FLP50A |
76 |
70 |
50,8 +3/-0 |
|
13FLP100A |
127 |
121 |
101,6 +3/-0 |
Options
:: Spring return device mounted on the shaft (Friction see table
below.)
:: Special machining on the shaft
:: Wirewound resistive element type (13LP series).
|
Model |
L |
Friction |
|
S13FLP12A |
30 ~ 30+MS |
3,5 N |
|
S13FLP25A |
35 ~ 35+MS |
5 N |
|
S13FLP50A |
40 ~ 40+MS |
5 N |
|
S13FLP100A |
50 ~ 50+MS |
5 N |
In case of 13FLP series with spring return device, please note the following:
The spring return device is mounted on the outside shaft, of which dimensions are as the table.
Our policy is to improve specification of our products continuously, so technical and production details can be changed without any notice.
|
|
|||
