Application
When vibrations have to be measured as significant parameters, InnoMeters are applied. Rotating parts in drives, gears, pumps, fans and many other technical products cause perturbing vibrations. Impulse-like loads, e.g. from a vibratory pile driver in the construction field, generate problems as well. In numerous vibration standards, for instance DIN 10816, significant vibration parameters are defined for a reliable evaluation of the vibration situation. These vibration parameters are precisely measured by InnoMeters and thus allow a safe assessment of the vibration state. InnoMeters are applied during the complete product cycle ? development, manufacturing, final inspection, service. Weak spots are discovered, the success of counter measures is proven and the compliance with limits is controlled.
Properties
The InnoMeters are highly universal measuring instruments for vibration parameters. They can be adapted to parameters from numerous vibration standards. This can be achieved by means of following settings: - Measurands: acceleration, velocity, displacement - Free filter adjustment 0.1 ... 40000 Hz - Up to 32 units, metric and imperial - Up to 8 vibration parameters
The operation, also of several instruments at the same time, is supported by the following indicators: - Connected sensor - Measuring point - Overload and underload
The clone function makes it possible to operate several InnoMeters at the same time, for example to measure several parameters simultaneously. The InnoMeter Pro is able not only to process signals from vibration sensors, but also from rpm sensors. Additionally, a conversion to other units is possible, for instance in order to measure length' speeds.
