InnoBeamer - Sensors on the PC
There is no direct connection for piezoelectric Sensors on the PC. So just use an adapter type InnoBeamer
the way it is shown in this picture. No other power supply is necessary.
The InnoBeamer supplies the internal amplifier of the sensor and digitizes the sensor signal. The digital
data streams get at the VibroMatrix instruments on your PC by USB cable. A safe link mode is used, which
transfers all data without any dropouts. Scanner, printer or other instruments can be used parallel on the
USB input of the PC.
|
 |
With 10 kHz sample rate per channel the InnoBeamer is suitable for measurements from 0.3 to 2000 Hz.
The InnoBeamer L2 is delivered together with the VibroMatrix control center InnoMaster and calibration software.
All you need for a complete measurement system additionally are sensors and instruments.
|
| Model |
InnoBeamer L2 |
| Channels for piezosensors |
2 |
| Channels for rpm sensors |
1 |
| Sample rate per channel |
10 kHz |
| Signal frequency (-3dB) |
0.3 ... 2000 Hz |
| Electrically isolated channels |
no |
|
