FDRF100 Automatisiertes System zur Motorwellenmessung
Für die Messung und Steuerung von Motorwellen
About the FDRF100 Automated System for Motor Shaft Measurement
The FDRF100 is an automatic optical measurement system.
Measurement starts by placing the piece between the two centers. The operator can specify all measurements and tolerances as needed. Any piece of the item can be measured.
More detailed scanning is possible. The optical micrometer can separately scans all set parts of the detail.
When scanning is completed the measurement results are reflected in the program for future statistic analysis.
All measurements are mapped in the program:
- Diameter
- Angle and taper
- Length
- Threads and screw pitch
- Run-out
- Depth of the hole
- Roundness
Benötigen Sie dieses Produkt für Ihr Projekt?
Fordern Sie jetzt ein unverbindliches Angebot an oder senden Sie uns Ihre Kontaktdaten für eine unverbindliche und kostenfreie Beratung. Unsere Vertriebsingenieure setzen sich so schnell wie möglich mit Ihnen in Verbindung.
Sprechen Sie mit unseren Experten
Nicht das richtige Produkt? Wir bieten Standard-Sensoren, helfen Ihnen aber auch gerne mit einem maßgeschneiderten Aufnehmer oder einer kompletten Messlösung weiter. Kontaktieren Sie uns einfach für eine kostenlose Beratung oder einen Kostenvoranschlag.
KontaktTechnische Spezifikationen
Spezifikationen | Wert |
---|---|
Accuracy | ±1µm |
Carriage movement range | 200mm |
Measurable diameters | From 0,1 to 25mm |
Scanning speed | 50mm/s |