About the ALF314 Multi-axis Force Sensor
The ALF314 measures forces in two axes at 90°. Apart from error evaluations, each output is pure and requires no mathematical manipulation.
The loadcell is ideally suited to many industrial and scientific applications, including automotive research.
The integral spherical bearing removes the possibility of applying moments to the loadcell. If rigid fixings are required and moments are present the performance specification may be affected, our engineering department would be happy to evaluate performance changes.
The loadcell can be manufactured with force ranges to suit the application. Please consult our engineering department about the viability of the required ranges. The example shown in the picture and drawing is a ±200kg model; there will be small differences in the dimensions of the fixings for other ranges.
We are happy to design variants of this loadcell to meet your specific requirements. Versions can be manufactured for higher temperature operation. Please consult our engineering department.
- Two axis loadcell
- Full load range: 2 - 10kN
- Rated output nominal: 1.2mV/V
- Non-lin./hysteresis: 0.1/0.1% RL
- Dimensions (mm): 110 x 63 x 20
1. AL = Applied load. 3. Temperature coefficients apply over the compensated range.
2. RL = Rated load. 4. Values apply to all axes unless otherwise specified.
The ALF314 is fitted with 2 metres of PVC insulated 9 core screened cable type 7-1-9C.