NM2-IP2-2L Tilt Measuring System
Dual axis tilt measuring system in a compact aluminium enclosure
Caractéristiques principales
- Measuring range ±3° up to ±45° per axis
- Accuracy ±0.1° (up to ±10°), ±0.2° (up to ±30°),±0.25° (up to ±45°)
- Analogue output 4 - 20 mA (2-wire-technology)
- Supply voltage 18 - 28 VDC
About the NM2-IP-2L Tilt Measuring System
The dual axis industrial tilt measuring system NM2-IP-2L is the combination of two non-contact inclination sensors and sensor adapted electronics. The measuring system is designed for precise tilt measurement in X- and Y-axis and intended for ground assembly. Available tilt measuring ranges are ±3° to ±45°. The two analogue output signals of 4 ... 20mA in 2-wire-technology are standard signals and therefore a further analysis is easily feasible.
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments. Furthermore, the built-in electronics are protected against humidity and vibrations.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Accuracy at 23°c | Up to ±10°: ±0.1° ; Up to ±30°: ±0.2° ; Up to ±45°: ±0.25° |
| Analogue output / burden | 4 - 20 mA (2-wire), max burden depending on supply voltage |
| Cross-sensitivity | < 1.5% at 30° |
| Dimensions (w x h x d) | ca. 160 x 65 x 86 mm (without EMC cable gland) |
| Electrical connection | M16 x 1.5 EMC cable glands on internal spring-cage terminal blocks |
| Enclosure | EMC-safe aluminium die-cast enclosure |
| Frequency range (-3db) | 0.5 Hz |
| Number of measuring axis | 2 |
| Power consumption | ca. 2 W |
| Preferred measuring range | ±3°, ±5°, ±10°, ±15°, ± 20°, ±30°, ±45° (other measuring ranges for both axis as well as different measuring ranges for each axis (e.g. X: ±30° Y: ±3°) on request possible) |
| Protection class | IP66 |
| Supply voltage | 18 - 28 VDC |
| Temperature, operating | -20 to +60 °C |
| Temperature, storage | -20 to +60 °C |
| Weight | ca. 1000 g |
Produits apparentés
Besoin d'autre chose?
NM2-IP-4L Tilt Measuring System
- Measuring range ±3° up to ±60° or 0 - 90°
- Dual axis tilt measuring system
- Robust EMC-safe aluminium enclosure IP66
NSS1-IP Tilt Measuring System
- Measuring range ±3° up to ±60° or 0 to 90°
- Switching accuracy max. 0,5%
- With 2 switching contacts
NSS2-M2-IP Tilt Measuring System
- Measuring range ±3° up to ±10°
- With 2 switching contacts per axis
- Robust EMC-safe aluminium enclosure IP66