NM1-IP-2L Tilt Measuring System
Single axis tilt measuring system in aluminium enclosure (IP68)
Caractéristiques principales
- Measuring range ±3° up to ±60° or 0 - 90°
- Accuracy ±0,1° (up to ±10°), ±0,2° (up to ±30°), ±0,25° (up to ±60°)
- Analogue output 4 - 20 mA (2-wire-technology)
- Supply voltage 18 - 28 VDC
About the NM1-IP-2L Tilt Measuring System
The single axis industrial tilt measuring system NM1-IP-2L is the combination of a non-contact inclination
sensor and sensor adapted electronics. The measuring system is designed for precise tilt measurement in one
axis and intended for side assembly. Available tilt measuring ranges are ±3° to ±60° or 0 - 10° to 0 - 90°.
The analogue output signal of 4 - 20mA in 2-wire-technology is a standard signal and therefore a further
analysis is easily feasible.
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP68), which is well
suited for applications in rough and industrial environments. Furthermore the built-in electronics are protected
against humidity and vibrations.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Accuracy at 23°c | Up to ±10°: ±0,1°, Up to ±30°: ±0,2°, Up to ±60°: ±0,25° |
Analogue output / burden | 4 - 20 mA (2-wire), max burden depending on supply voltage |
Dimensions (w x h x d) | 98 x 63 x 38 mm (Dimensions without EMC-cable gland) |
Electrical connection | 3 m cable 2 x 0,25 mm² (AWG20) Optional: cable length according to customer requirements or connector M12 |
Enclosure | EMC-safe aluminium die-cast enclosure |
Frequency range (-3db) | 0,5Hz |
Number of measuring axis | 1 |
Power consumption | Max. 1 W |
Preferred measuring range | ±3°, ±5°, ±10°, ±15°, ± 20°, ±30°, ±45°, ±60° 0 to 10°, 0 to 30°, 0 to 45°, 0 to 60°, 0 to 90° other measuring ranges on request |
Protection class | IP 68 |
Supply voltage: | 18 to 28 VDC, electronic is protected against voltage reversal |
Temperature, operating | -20 to +60 °C |
Temperature, storage | -35 to +75 °C |
Weight | Approx. 550g (Version with 3 m cable) |
Produits apparentés
Besoin d'autre chose?
NM1-IP-2L Tilt Measuring System
- Measuring range: ±3° up to ±60° or 0 to 90°
- IP68 aluminium enclosure
- Supply voltage 18 - 28 VDC
NM1-IP-4L Tilt Measuring System
- Measuring range: ±3° up to ±60° or 0 to 90°
- IP66 environmental sealing
- Accuracy ±0,1° (up to ± 15°)