NM1-2L-420-ATEX Tilt Measuring System
Single axis tilt measuring system
Caractéristiques principales
- Measuring range ±3° up to ±60° or 0 to 90°
- Accuracy ±0,1° (up to ±10°), ±0,2° (up to ±30°), ±0,25° (up to ±60°)
- Analogue output 4 … 20 mA (2-wire-technology)
- Supply voltage 18 … 28 VDC
About the NM1-2L-420-ATEX Tilt Measuring System
The single axis industrial tilt measuring system NM1-2L-420-ATEX is the combination of a non-contact inclination sensor and sensor adapted electronics. The measuring system is designed for precise tilt measurement in one axis. It is applicably for the use in defined explosion hazardous areas according to the attached EU type examination certificate. The system is intended for side assembly. Available tilt measuring ranges are ±3° to ±60° or 0 … 10° to 0 … 90°. The analogue output signal of 4 ... 20mA in 2-wire-technology is a standard signal and therefore a further analysis is easily feasible.
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure with external mounting holes (IP68, test condition 1h, 1m water depth), which is well suited for applications in rough and industrial environments. Furthermore, the built-in electronics are protected against humidity and vibrations.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Accuracy at 23°c | Up to ±10°: ±0,1° Up to ±30°: ±0,2° Up to ±60°: ±0,25° |
| Analogue output / burden | 4 - 20 mA (2-wire), max. 500= burden at supply voltage of 24VDC |
| Cross-sensitivity | < 1,5% at 30° cross slope |
| Dimensions (w x h x d) | 115 x 64 x 35 mm (without EMV cable glands and external earth connection) |
| Frequency range (-3db) | 0,5 Hz |
| Power consumption | < 1 W |
| Preferred measuring range | ±3°, ±5°, ±10°, ±15°, ± 20°, ±30°, ±45°, ±60°, 0 to 10°, 0 to 30°, 0 to 45°, 0 to 60°, 0 to 90° other measuring ranges on request |
| Protection class | IP68 according to DIN EN 60529 (VDE 0470), test condition: 1 h, 1 m water depth An additional mechanical protection against jet water is recommended |
| Supply voltage | 18 - 28 VDC, electronic is protected against voltage reversal |
| Temperature drift of sensitivity | < -0,25 %/K |
| Temperature drift of zero point | < ± 0,1 mV/K |
| Temperature, operating | -25 to +60 °C |
| Temperature, storage | -25 to +60 °C |
| Weight | Ca. 800g with 10m connection cable |
Produits apparentés
Besoin d'autre chose?
NM1-IP-2L Tilt Measuring System
- Measuring range: ±3° up to ±60° or 0 to 90°
- IP68 aluminium enclosure
- Supply voltage 18 - 28 VDC
NM1-IP-4L Tilt Measuring System
- Measuring range: ±3° up to ±60° or 0 to 90°
- IP66 environmental sealing
- Accuracy ±0,1° (up to ± 15°)