NM2-IP2-2L-OLED Tilt Measuring System
Dual axis tilt measuring system in a compact aluminium enclosure with an OLED display per measuring axis
Caractéristiques principales
- Measuring range ±3° up to ±45° per axis
- Accuracy ±0,1° (up to ±10°), ±0,2° (up to ±30°), ±0,25° (up to ±45°)
- Analogue output 4 … 20 mA (2-wire-technology)
- Front panel OLED display per axis
- Supply voltage 18 … 28 VDC
About the NM2-IP2-2L-OLED Tilt Measuring System
The dual axis industrial tilt measuring system NM2-IP2-2L-OLED is the combination of two non-contact inclination sensors, sensor adapted electronics and two OLED displays. The measuring system is designed for precise tilt measurement in X- and Y-axis and intended for ground assembly. Available tilt measuring ranges are ±3° to ±45°. The two analogue output signals of 4 - 20mA in 2-wire-technology are standard signals and therefore a further analysis is easily feasible. The display of the current measured value, bar graph, trend display, the peak value (MIN, MAX) and the setting of limit values takes place via an OLED display for each measuring axis in the front panel housing.
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments. Furthermore, the built-in electronics are protected against humidity and vibrations. The two OLED displays are designed for installation in a front panel.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Accuracy at 23°c | Up to ±10°: ±0.1° ; Up to ±30°: ±0.2° ; Up to ±45°: ±0.25° |
| Analogue output / burden | 4 - 20 mA (2-wire), max burden depending on supply voltage |
| Cross-sensitivity | < 1.5% at 30° |
| Dimensions (w x h x d) | ca. 160 x 65 x 86 mm (without EMC cable gland); ca. 96 x 48 x 53 mm (OLED display, without connection terminals)) |
| Electrical connection | 3 m connection cable 2 x 2 x 0.25 mm²; optional: cable length according to customer requirements |
| Enclosure | EMC-safe aluminium die-cast enclosure |
| Frequency range (-3db) | 0.5 Hz |
| Number of measuring axis | 2 |
| Power consumption | ca. 2 W |
| Preferred measuring range | ±3°, ±5°, ±10°, ±15°, ± 20°, ±30°, ±45° (other measuring ranges for both axis as well as different measuring ranges for each axis (e.g. X: ±30° Y: ±3°) on request possible) |
| Protection class | IP66 |
| Supply voltage | 18 - 28 VDC |
| Temperature, operating | -20 to +60 °C (measurement system); 0 to +40 °C (OLED display) |
| Temperature, storage | -20 to +60 °C |
| Weight | ca. 1450 g |
Produits apparentés
Besoin d'autre chose?
NM2-IP2-2L-OLED Tilt Measuring System
- Measuring range ±3° up to ±45° per axis
- Front panel OLED display per axis
- Accuracy from ±0,1° to ±0,25°
NM2-IP-4L Tilt Measuring System
- Measuring range ±3° up to ±60° or 0 - 90°
- Dual axis tilt measuring system
- Robust EMC-safe aluminium enclosure IP66
NSS1-IP Tilt Measuring System
- Measuring range ±3° up to ±60° or 0 to 90°
- Switching accuracy max. 0,5%
- With 2 switching contacts