AWMD-8 Full Bridge Strain Gauges for Dynamic Measurement
8mm full bridge gauge, is applicable up to 800°C and dedicated to dynamic measurement
Caractéristiques principales
- 1% (10000×10⁻⁶ strain) Strain limit
- Operational temperature: -196~+800°C
- Inconel backing, Special alloy element
- Type: Full bridge, for dynamic measurement
- Gauge resistance: 120Ω
- Gauge length: 8mm
About the AWMD-8 Full Bridge for Dynamic Measurement
The AWMD is applicable up to 800°C and is dedicated to dynamic strain measurement. A high pass filter is a standard accessory. Using the high pass filter, unnecessary direct current component and low frequency component (thermal output, drift, etc.) are cancelled. A DC exciting dynamic strain meter such as DC-96A/DC-97A, smart strain recorder such as DC-204R, or multi-recorder TMR-200 series should be used for the measurement.
AW series high temperature weldable strain gauge
These strain gauges have strain sensing elements fully encapsulated in corrosion-resisting metal tubes made of stainless steel or Inconel (except AW-6-350). The strain gauge backings are also made of the same material, and the gauges are installed by spot welding to metal specimens using a dedicated spot welder. The maximum operating temperatue is 800°C for the AWHU. These gauges are suited to measurement in high temperature harsh environments such as underwater or gas-filled atmosphere, or for long term. The AWC-2B and AWCH-2 are available in 1-Gauge 4-Wire configuration.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Backing | Inconel |
| Bonding adhesive | Spot welding (TML spot welder W-50R is required) |
| Element | Special alloy |
| Fatigue life at room temperature | 1×10⁶ (±1000×10⁻⁶ strain) |
| Main object material | Metal |
| Operational temperature(°c) | -196~+800°C |
| Strain limit | 1% (10000×10⁻⁶ strain) |
| Temperature compensation range(°c) | - |