ATF315 Miniature Reaction Torque Sensor
Low-range disc-type static torque transducer
Caractéristiques principales
- Measurement ranges 0 - 10 mNm to 0 - 5 Nm
- Non-linearity 0.05 % RT
- Output signal 0.2 - 1 mV/V
- Supply voltage 10 VDC
- -10 - +80 °C Operating temperature
- Repeatability: ±0.05% RT
- Hysteresis: ±0.1% RT
About the ATF315 Miniature Reaction Torque Sensor
This static torque transducer is used extensively in instrumentation and small electric motor test and calibration applications.
Torque transmission must be arranged to input only torque as extraneous forces, such as tare loads or axial loads will cause measurement errors. Note we are able to calibrate with extraneous load cases replicated. The highly symmetrical signal outputs are usually between 0.2 and 1mV/V for full range.
We are happy to design variants of this transducer to meet your specific requirements. Please consult our engineering department. If you require a higher torque range than 5 Nm the ALF311 is available with ranges up to 1.000 Nm.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Bridge resistance | 700 Ohm |
| Compensated temperature range | -10 - +50 °C |
| Creep, 20 min | ±0.3 % AT |
| Hysteresis | ±0.1 % RT |
| Insulation resistance, minimum at 50 vdc | 500 MOhm |
| Material | Aluminium |
| Non-linearity, terminal | ±0.05 % RT |
| Operating temperature range | -10 - +80 °C |
| Overload, safe | 125 % RT |
| Overload, ultimate | 150 % RT |
| Rated output, nominal | 0.2 to 1 mV/V (range dependant) |
| Rated torque | 10 mNm to 5 Nm |
| Repeatability | ±0.05 % RT |
| Supply voltage, max. | 15 V |
| Supply voltage, recommended | 10 V |
| Temperature effect on rated output | ±0.005 % AT/K |
| Temperature effect on zero load output (1 mv/v) | ±0.01 % RT/K |
| Weight (excl. cable) | approx. 110 to 130 g |
| Zero load output: | ±4 % RT |
Produits apparentés
Besoin d'autre chose?
01165-01171 Reaction Torque Sensor
- Measuring ranges: from 6 to 22.600 Nm
- 150% of F.S. Overload capacity
- -54 to +121°C Operating temperature