ALF250 Miniature Force Sensor
Miniature diaphragm loadcell
Caractéristiques principales
- Miniature diaphragm loadcell
- Measurement ranges: 100N, 200N, 400N, 800N
- Tension, compression & bi-directional calibration
- Non-lin./hysteresis: 0.5/0.5% RL
- Dimensions (mm): Ø15 x 8
- Easy installation
- Hardened stainless steel body
About the ALF250 Miniature Force Sensor
The ALF250 is ideally suited to force measurements in confined spaces in both tension and compression for control of critical parameters in all kinds of industrial processes. Their versatility is such that they are also applied in a great number of important fields of scientific and engineering test work, mobile as well as workshop, static and dynamic.
We are happy to design variants of this loadcell to meet your specific requirements. Please consult our engineering department.
Geometry: Very small loadbutton cell for force measurement in confined spaces. Used in compression and/or tension on a wide range of OEM or end-user applications.
With bi-directional versions there is a small difference between the output signal for compression and tension. All standard bi-directional loadcells are calibrated in both modes and the output for each direction is stated on the test / calibration certificate.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Bridge resistance | 350 Ω |
| Creep - 20 minutes | ±0.1, % AL |
| Excitation voltage - maximum | 10V |
| Excitation voltage - recommended | 5, V |
| Hysteresis | ±0.5, % RL |
| Insulation resistance - minimum at 50vdc | 500 MΩ |
| Load direction | Tension, compression, bi-directional |
| Measurement ranges | 100N, 200N, 400N, 800N |
| Non-linearity - terminal | ±0.5, % RL |
| Overload - safe | 50 % RL |
| Overload - ultimate | 100 % RL |
| Rated output - nominal | 1.6, mV/V |
| Rated output - rationalised | 1.0, mV/V |
| Rationalisation tolerance | ±0.5, % RL |
| Repeatability | ±0.1, % RL |
| Sealing | IP65 |
| Temperature effect on rated output per ºc | ±0.005, % AL |
| Temperature effect on zero load output per ºc | ±0.03, % RL |
| Temperature range - compensated | -10 to +50, ºC |
| Temperature range - safe | -10 to +80, ºC |
| Weight - nominal (excluding cable) | 8 to 12g |
| Zero load output | ±4, % RL |
Produits apparentés
Besoin d'autre chose?
ALF251 Miniature Force Sensor
- Measurement range: up to 3.2 kN
- Ideal for applications in confined spaces
- IP65 protection rating
ALF255 Miniature Force Sensor
- Measurement ranges: up to 6.4 kN
- Versions operating up to +250°C possible
- ø30mm x 25mm body
ALF259 Miniature Diaphragm Force Sensor
- Measuring ranges: 250 N, 500 N or 1 kN
- Non-lin./hysteresis: 0.5/0.5% RL
- Ø12.7mm x 9mm body