ALF251 Miniature Force Sensor
Miniature loadbutton cell for force measurement in confined spaces
Caractéristiques principales
- Miniature diaphragm loadcell
- Measurement range: 100N, 200N, 400N, 800N, 1.6kN, 3.2kN
- Tension, compression and bi-directional
- Non-lin./hysteresis: 0.5/0.5% RL
- Dimensions (mm): Ø20 x 13
- Easy installation
- Sealed to IP65
About the ALF251 Miniature Force Sensor
The ALF251 is ideally suited to force measurements in confined spaces in both tension and compression for control of critical parameters in all kinds of industrial processes. Their versatility is such that they are also applied in a great number of important fields of scientific and engineering test work, mobile as well as workshop, static and dynamic.
We are happy to design variants of this loadcell to meet your specific requirements. Please consult our engineering department.
The 100N range is manufactured in aluminium. All other standard ranges are manufactured in stainless steel.
When this loadcell is rationalized the resistors are housed in a capsule located in the loadcell cable 100mm from the free end.
Capsule dimensions are Ø10mm by 57mm.
Geometry: Very small loadbutton cell for force measurement in confined spaces. Used in compression and/or tension on a wide range of OEM or end-user applications.
With bi-directional versions there is a small difference between the output signal for compression and tension. All standard bi-directional loadcells are calibrated in both modes and the output for each direction is stated on the test / calibration certificate.
Other features ALF251
- Tension / compression / bi-directional calibration
- Standard 2 year warranty
- Hardened stainless steel body
Notes
1. AL = Applied load.
2. RL = Rated load.
3. Temperature coefficients apply over the compensated range.
4. The load must be applied directly through the central loading axis.
Connections
The loadcell is fitted with 2 metres of PVC insulated 4 core screened cable type 7-1-4C.
Excitation + = Red Signal + = Yellow Screen = Orange
Excitation - = Blue Signal - = Green
Reverse the signal connections to obtain a positive signal in tension mode. The screen is not connected to the loadcell body.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Bridge resistance | 350, O |
| Creep - 20 minutes | ±0.1, % AL |
| Excitation voltage - maximum | 10, V |
| Excitation voltage - recommended | 10, V |
| Hysteresis | ±0.5, % RL |
| Insulation resistance - minimum at 50vdc | 500, MO |
| Load direction | Tension, compression, bi-directional |
| Measurement ranges | 100N, 200N, 400N, 800N, 1.6kN, 3.2kN |
| Non-linearity - terminal | ±0.5, % RL |
| Overload - safe | 50% RL |
| Overload - ultimate | 100, % RL |
| Rated output - nominal | 1.6, mV/V |
| Rated output - rationalised | 1.0, mV/V |
| Rationalisation tolerance | ±0.5, % RL |
| Repeatability | ±0.1, % RL |
| Sealing | IP65 |
| Temperature effect on rated output per ºc | ±0.005, % AL |
| Temperature effect on zero load output per ºc | ±0.03, % RL |
| Temperature range - compensated | -10 to +50, ºC |
| Temperature range - safe | -10 to +80, ºC |
| Weight - nominal (excluding cable) | 8 to 11, g |
| Zero load output | ±4, % RL |