ALF252 Pancake Force Sensor
Low profile axial loadcell for use in force measurements in tension and compression
Caractéristiques principales
- Full load range: 1kN, 2kN, 4kN, 8kN, 10kN
- Tension, compression and bi-directional
- Non-lin./hysteresis: 0.1/0.1% RL
- Dimensions (mm): Ø99 x 27
About the ALF252 Pancake Force Sensor
With bi-directional versions there is a small difference between the output signal for compression and tension. All standard bi-directional loadcells are calibrated in both modes and the output for each direction is stated on the test / calibration certificate.
The ALF252 is ideal for engineering force measurements particularly in applications where there is a limit on the height of the loadcell. It can be used for test machines and a wide range of general industrial applications.
We are happy to design variants of this loadcell to meet your specific requirements. Versions can be manufactured for fully compensated operation up to +250°C. Please consult our engineering department.
Geometry: Low profile axial loadcell for use in force measurements in tension and compression.
All standard ranges are manufactured in stainless steel.
Notes
1. AL = Applied load. 3. Temperature coefficients apply over the compensated range.
2. RL = Rated load. 4. The load must be applied directly through the central loading axis.
Connections
The loadcell is fitted with 2 metres of PVC insulated 4 core screened cable type 7-2-4C.
Excitation + = Red Signal + = Yellow Screen = Orange
Excitation - = Blue Signal - = Green
Reverse the signal connections to obtain a positive signal in tension mode. The screen is not connected to the loadcell body.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Above 400kgf | 700 Ω |
| Bridge resistance up to 400kgf | 350 Ω |
| Creep - 20 minutes | ±0.05% AL |
| Excitation voltage - maximum | 20V |
| Excitation voltage - recommended | 10V |
| Hysteresis | ±0.1% RL |
| Insulation resistance - minimum at 50vdc | 500 MΩ |
| Load direction | Tension, compression, bi-directional |
| Measurement range | 1kN, 2kN, 4kN, 8kN, 10kN |
| Non-linearity - terminal | ±0.1% RL |
| Overload - safe | 50 % RL |
| Overload - ultimate | 100 % RL |
| Rated output - nominal | 1.6mV/V |
| Rated output - rationalised | 1.5 mV/V |
| Rationalisation tolerance (applies to single direction calibrations) | ±0.5% RL |
| Repeatability | ±0.02% RL |
| Temperature effect on rated output per °c | ±0.005% AL |
| Temperature effect on zero load output per °c | ±0.02% RL |
| Temperature range - compensated | -10 to +50°C |
| Temperature range - safe | -10 to +80°C |
| Weight - nominal (excluding cable) | 840 to 940g |
| Zero load output | ±4% RL |
Produits apparentés
Besoin d'autre chose?
ALF254 Pancake Force Sensor
- Measuring range: ~25 kN to ~200 kN
- Shear web structure
- High vertical & lateral mechanical stiffness
ALF302 Pancake Force Sensor
- Measuring range: ~5 kN to ~50 kN
- Low profile axial loadcell
- Dimensions (mm): Ø38 x 16
ALF306 Pancake Force Sensor
- Measuring range: ~50 N to ~ 10 kN
- Non-lin./hysteresis: 0.3/0.2 - 0.5/0.3% RL
- Various designs possible on request