FN3280 S-beam Force Sensor
Designed to measure low force
Caractéristiques principales
- High accuracy
- Tension and compression
- Integrated mechanical stops
- Full wheatstone bridge
- Cable output
About the FN3280 S-beam Force Sensor
The FN3280 S-beam load cell is designed to measure low force and has standard ranges of 1 to 5 N [0.2 to 1 lbf].
Integrated mechanical stops protect against accidental overloads up to 100 times F.S. The FN3280 provides a combination of economy and performance, this low cost load cell has an accuracy of 0.1% F.S.
To meet your needs we also offer complete turnkey systems. The matched components (sensor, power, amplifier and digital display) are formatted, calibrated and ready for immediate use.
Applications for FN3280
- Process control equipment
- Medical instruments
- Weighing
- Laboratory and research
- Calibration test benches
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Accuracy | 0.1% F.S. |
Full scale range | 1N, 2N, 5N |
Load direction | Tension and compression |
Material | Body and cover in aluminum alloy |
Output signal | ±1.5 mV/V |
Protection | IP50 |
Produits apparentés
Besoin d'autre chose?
FN7110 S-beam Force Sensor
- Measuring range: 10/100 N to 1k/10 kN
- Overload protection up to 12x F.S.
- Two ranges in the same loadcell
FN9620 S-beam Force Sensor
- Measuring range: 500 N to 10 kN
- IP68 protection rate-1m water column
- High tensile strength Stainless Steel
FN3030 S-beam Force Sensor
- Measuring range: ~50 N to ~100 kN
- 0.1% F.S. accuracy
- Well suited for customization