ALF304 Brake Pedal Force Sensor
Compact, low profile loadcell for measuring brake pedal application forces
Caractéristiques principales
- Off center loading compensation
- Simple cable tie or screw fixing
- Anti-slip rubber pad
- Removable loading plate
- Output rationalized to 2mV/V
About the ALF304 Brake Pedal Force Sensor
The ALF304 is a compact, low profile loadcell for measuring brake pedal application forces. The loadcell is robust in construction with a maximum force range of 2500N (250kgf). Its multi-hole fixing allows simple attachment to any shape pedal using screws or cable ties. The low profile stainless steel design maintains the brake pedals ergonomic geometry.
If you require other force ranges the ALF322 or ALF323 may be suitable.
We are happy to design variants of this loadcell to meet your specific requirements. Versions can be manufactured for higher temperature operation. Please consult our engineering department.
All standard ranges are manufactured in stainless steel.
Notes
1. AL = Applied load.
2. RL = Rated load.
3. Temperature coefficients apply over the compensated range.
Connections
The ALF304 is fitted with 2 metres of flexible polyurethane jacketed 4 core screened cable.
Excitation + = Red, Excitation - = Blue, Signal + = Yellow, Signal - = Green, Screen = Orange.
The screen is not connected to the loadcell body.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Bridge resistance | 700 Ω |
| Creep - 20 minutes | ±0.05% AL |
| Excitation voltage - maximum | 20V |
| Excitation voltage - recommended | 10V |
| Hysteresis | ±0.05% RL |
| Inclined load error - concentric at 3° | ±0.25% RL |
| Insulation resistance - minimum at 50vdc | 500MΩ |
| Load direction | Compression |
| Measurement range | 2,5kN |
| Non-linearity - terminal | ±0.05% RL |
| Overload - safe | 50% RL |
| Overload - ultimate | 200% RL |
| Rated output - rationalised | 2.0mV/V |
| Rationalisation tolerance | ±0.1% RL |
| Repeatability | ±0.02% RL |
| Sealing | IP65 |
| Sideload - safe | 100% RL |
| Structural stiffness | 3.9 x 10^7N/m |
| Temperature effect on rated output per °c | ±0.005% AL |
| Temperature effect on zero load output per °c | ±0.005% RL |
| Temperature range - compensated | -10 to +50°C |
| Temperature range - safe | -10 to +80°C |
| Weight - nominal (excluding cable) | 210g |
| Zero load output | ±4% RL |
Produits apparentés
Besoin d'autre chose?
ALF305 Seat Belt Tension Force Sensor
- Measuring range: 0 to 16 kN
- Measures seat belt tension forces
- Minimal mass, stress and deflection
ALF319 Hand Brake Force Sensor
- Measuring range: 0 to 1 kN
- Measurement of an ergonomic force
- Good extraneous load rejection
ALF321 Gear Shift Force Sensor
- Measuring range: 0 to 200 N
- Measures gear lever forces for gear selection
- Pure calibrated outputs for each axis