10HP Multi-turn Potentiometer
World's smallest 10-turn Potentiometer (5-turn and 10-turn)
Caractéristiques principales
- Wirewound
- Dimensions (mm) DxL: 10.5×19.2 / 10.5×25.5
- Resistance range (ohm): 100Ω -20kΩ / 100Ω -50kΩ
- Linearity (±%): 0.35 to 0.2 / 0.25 to 0.1
- Mechanical travel (+10° 0°): 1,800 +30° 0° /
3,600 +30° 0° - Electrical travel (±5°): 1,800 / 3,600
About the 10HP Multi-turn Potentiometer
The Multi-turn Potentiometer 10HP is world's smallest 10-turn potentiometer. The potentiometer is available in 5-turn models and 10-turn models.
Features Multi-turn potentiometer 10HP-5
- Wirewound
- Dimensions (mm) DxL: 10.5×19.2
- Standard resistance range (ohm): 100Ω -20kΩ
- Independent linearity (±%): 0.35 to 0.2
- Mechanical travel (+10° 0°): 1,800 +30° 0°
- Electrical travel (±5°): 1,800
Features Multi-turn potentiometer 10HP-10
- Wirewound
- Dimensions (mm) DxL: 10.5×25.5
- Standard resistance range (ohm): 100Ω -50kΩ
- Independent linearity (±%): 0.25 to 0.1
- Mechanical travel (+10° 0°): 3,600 +30° 0°
- Electrical travel (±5°): 3,600
Special Specifications Available
3turn type (S10HP3), lower resistance values (20Ω, 50Ω), shaft dia. (ø3.175mm) · bushing with inch dimensions, special machining on the shaft, shaft with front and rear extension (rear shaft with 0.8mm dia. and 10mm length).
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
(within 5kΩ): (±0.25%) (±0.15%) | |
Precision Class: ±0.2% ±0.1% | |
Dielectric strength | 1 minute at 500 V.A.C. |
Electrical travel | 360º Xn ±5º (n: No. of turns) |
Independent linearity tolerance (5-turn 10-turn) | Standard Class: ±0.35% ±0.25% |
Insulation resistance | Over 100 MΩ at 500 V.D.C. |
Mass | Approx. 17g (5-turn), Approx. 20g (10-turn) |
Max. practical resistance value | 50kΩ (5turn), 100kΩ (10turn) |
Max. torque exerted on fastening the mounting nut to the bushing | Within 1N·m (10kgf·cm) |
Max. working voltage | 450 V |
Mechanical travel | 360º Xn + 30º 0° (n: No. of turns) |
Noise | Within 100O E.N.R. |
Power rating | 0.5W (5-turn), 1.0W (10-turn) |
Resist. temp. coefficient of wire | ±20p.p.m./ºC |
Shaft dia. (mm) | 4 |
Standard resistance range | 100Ω to 20kΩ (5turn), 100Ω to 20kΩ (10turn) |
Starting torque | Within 3mN·m (30gf·cm) |
Stopper strength | Approx. 0.1N·m (1kgf·cm) |
Total resistance tolerance | Standard Class ±3%(H), Precision Class ±1%(F) |
Produits apparentés
Besoin d'autre chose?
FCP12AC Single-turn Potentiometer
- Essentially infinite resolution
- Resistance Range 1 Ω to 10 kΩ
- Various special specifications available
FCP12A Single-turn Potentiometer
- Essentially infinite resolution
- Various special specifications available
- Independent Linearity ±2.0% to ±1.0%
FCP22AC Single-turn Potentiometer
- Fully continuous rotation without stopper
- Resistance Range 1 Ω to 10 kΩ
- Independent Linearity ±1.5% to ±1.0%