12HHP Multi-turn Potentiometer
Hybrid Potentiometer (Bushingmount) 10-turn
Caractéristiques principales
- Hybrid
- Dimensions (mm) DxL: 13x25.5
- Resolution: Essentially infinite
- Independent linearity (±%): 0.4 to 0.1
- Mechanical travel (+10° 0°): 3,600 +15° 0°
- Electrical travel (±5°): 3,600
About the 12HHP Multi-turn Potentiometer
The 12HHP is a small size, high resolution, long-life potentiometer with an outer diameter of 13mm.
Bushingmount type
- With lug terminals: 12HHP
- With pin terminals for pc board: 12HHP-10P
Servomount type
- 12HHPS-10
Special Specifications Available
5-turn type (S12HHP-5), shaft with front and rear extension (rear shaft with 0.8mm dia. and 10mm length), special machining on the shaft, simple sealed housing (in case of servomount type, the housing length becomes longer by 1.5mm).
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Contact resistance variation | Within 5% C.R.V. |
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 3,600º ±5º |
Independent linearity tolerance | Standard Class ±0.4%, Precision Class ±0.1% (±0.2% in case of within 5kΩ) |
Insulation resistance | Over 1,000MΩ at 500V.D.C. |
Mass | Approx. 109 |
Max. practical resistance value | 100kΩ |
Max. torque exerted on fastening the mounting nut to the bushing | Within 0.8mN·m (80kgf·cm) |
Max. working voltage | 450V |
Mechanical travel | 3,600º +15º |
Output smoothness | Within 0.05% against input voltage |
Power rating | 1.0 W |
Resistance temp. coefficient | ±100p.p.m./ºC |
Resolution | Essentially infinite |
Shaft dia. (mm) | 3 |
Standard resistance values | 2k, 5k, 10k, 20k, 50k (Ω) |
Starting torque | Within 3mN·m (30gf·cm) (Bushingmount type), Within 2mN·m (20gf·cm) (Servomount type) |
Stopper strength | Approx. 0.15N·m (15kgf·cm) |
Total resistance tolerance | Standard Class ±10%(K), Precision Class ±5%(J) |
Produits apparentés
Besoin d'autre chose?
20HHP Multi-turn Potentiometer
- Measuring range 5 or 10 turns
- High resolution, long-life potentiometer
- Various special specifications available
22HHP Multi-turn Potentiometer
- Measuring range 3, 5 or 10 turns
- Low-cost & high resolution
- Various special specifications available
46HDS Multi-turn Potentiometer
- Measuring range 3, 5, 10, 15, 20 or 30 turns
- Resistance range 10Ω -20kΩ to 50Ω -200kΩ
- 46 mm outer diameter