CP50 Single-turn Potentiometer
1-turn Potentiometer Wirewound (Servomount) | RoHS Compliant
Caractéristiques principales
- Wirewound
- Dimensions D x L (mm): 50.8x18
- Standard Resistance Range 50 Ω to 20 kΩ
- Independent Linearity (± %): 0.5 to 0.1
- Mechanical travel: 360°
- Electrical travel: 355° ±3°
About the CP50 Single-turn Potentiometer- Wirewound (Servomount)
The CP50 is a servomount type potentiometer with ball bearings and a 51mm outer diameter and turret side terminals.
Special Specifications Available
Lower resistance values (10Ω, 20Ω), extra taps (available up to 10 taps), multiganged (available up to 7 gangs. Housing length is extended by 12mm per gang), shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), spring return device incorporated (automatically returning to the zero position), with stopper (rotating angle becomes 330º and stopper strength is 0.9N·m [9kgf·cm]), special electrical travel, shaft dia. (ø6.35mm) with inch dimensions, special machining on the shaft.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 355º ±3º |
Independent linearity tolerance | Standard Class ±0.5%, Precision Class ±0.1% (±0.2% in case of within 2kΩ) |
Insulation resistance | Over 1,000MΩ at 1,000 V.D.C |
Mass | Approx. 120g |
Max. practical resistance value | 50kΩ |
Mechanical travel | 360º (Endless) |
Noise | Within 100Ω E.N.R. |
Power rating | 1.5W |
Resist. temp. coefficient of wire | ±20p.p.m./ºC |
Shaft diameter (mm) | 6 |
Standard resistance range | 50Ω to 20kΩ |
Starting torque | Within 5mN·m (50gf·cm) |
Total resistance tolerance | Standard Class ±3%(H), Precision Class ±1%(F) |
Produits apparentés
Besoin d'autre chose?
12HP Multi-turn Potentiometer
- Standard resistance range: 100Ω to 50kΩ (5turn), 100Ω to 100kΩ (10turn)
- Max. practical resistance value: 70kΩ (5turn), 150kΩ (10turn)
- Total resistance tolerance: Standard Class ±3%(H), Precision Class ±1%(F)
12HPS Multi-turn Potentiometer
- Measuring range 3, 5 or 10 turns
- 13 mm outer diameter
- Resistance range 100 Ω to 100 kΩ
20HP Multi-turn Potentiometer
- Measuring range 3, 5 or 10 turns
- 20 mm outer diameter
- Independent linearity ±0.3% to ±0.1%