R120LC Rotary Inductive Position Sensor
A cost efficient, DC operated non-contact angular position sensor
Caractéristiques principales
- Low cost, Long term reliability
- Precision ball bearings
- Infinite resolution, Ratiometric output
- Low moment of inertia
- Wide operating temp. range
- 5VDC supply voltage
- 0 to 120 degree sensing range
- Non-contact electrical design
About the R120LC Rotary Inductive Position Sensor
The R120LC RVIT (Rotary Variable Inductance Transducer) is a cost efficient, DC operated non-contact angular position sensor. It provides a smooth 0.5 to 4.5VDC output, ratiometric to the supply voltage and proportional to angular position over the 120 degree sensing range. The R120LC utilizes non-contacting, differential inductive technology, and does not suffer the wear problems experienced by potentiometers.
The R120LC proprietary design utilizes a set of four printed circuit coils and a light-weight conductive spoiler to achieve superior performance with a low moment of inertia. During operation, the light weight spoiler rotates with the transducer shaft, differentially altering the inductance of the printed circuit planar coils. The resulting unbalance is precisely measured using a patented autoplex circuit. This signal is then converted to a linear DC output voltage proportional to the angle of the rotor shaft. The digital circuit provides resistance to environmental disturbances such as EMI and RFI, and is ideally suited to the most rigorous industrial applications.
Calibrated over the full 120 degree sensing range, the R120LC offers exceptional performance at a cost effective price. It also features a wide operating temp. range, infinite resolution, and an extremely long rotational cycle life.
Also see our other DC operated, angular position sensor models, RVIT-15 Series (single ended DC operation, voltage or current output), R60D (bipolar DC operation), and the R30D (DC operated RVDT).
Applications for R120LC
- Valve position
- Fly-by-wire joy-stick position feedback
- General aviation stall warning sensor
- Potentiometer replacement
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Angular range | 0 to 120 degree |
| Bearings | ABEC 3 precision |
| Electrical connection | 4 lead wires, 28 AWG , PTFE insulation, 12 inches [30cm] long |
| Frequency response | 200 HZ @ -3 dB |
| Input current | 21mA maximum |
| Input voltage | 5±0.25 VDC |
| Mechanical angular range | 360 degrees (no stops) |
| Non-repeatability and hysteresis | 0.1% of FRO maximum |
| Output at range ends | +0.5 to +4.5 VDC (ratiometric to input voltage) |
| Output current | 5mA maximum |
| Output impedance | 1O maximum |
| Sensitivity | 6.67mV/V/degree (ratiometric to input voltage) |
| Storage temp. range | -67°F to +257°F [-55°C to 125°C] |
| Temp coefficient of output | ±0.02% of FSO per ºF [0.03% of FSO per ºC], over operating temp. range |
| Torque | 0.12 inch.ounce-force [8.6 gram-force.cm] |
| Weight | 1.2oz [34gm] |
Produits apparentés
Besoin d'autre chose?
RVIT-Z Rotary Inductive Position Sensor
- Angular range: ±75°
- Extremely light weight
- Easy integration into applications
RVIT-15-60 Rotary Inductive Position Sensor
- Angular range: ±75°
- Shielded ABEC 3 precision bearings
- Operating from single rail DC voltage supply
RVIT-15-120i Rotary Inductive Position Sensor
- Angular range: 0° to 120°
- Internal voltage regulation
- Resistant to environmental disturbances