RSE RVDT
Ideal for measuring the position of quarter-turn valves, flue dampers, weir gates, mail sorters, conveyor check weighing systems, dancer arm tensioners, and a myriad of other applications involving fractional-turn shaft movements
Caractéristiques principales
- 0º to 30º, 60º, 90º, or 120º rotational ranges
- Full 360º rotation contactless technology
- Non-linearity less than ±0.1% of FRO
- DC voltage absolute analog outputs
- Environmentally sealed to IEC IP-66
- Integral DC-in / DC-out electronics
About the RSE RVDT
The RSE series of contactless, fractional-turn, absolute output rotary position sensors are ideal for measuring the position of quarter-turn valves, flue dampers, weir gates, mail sorters, conveyor check weighing systems, dancer arm tensioners, and a myriad of other applications involving fractional-turn shaft movements. They are also useful for high reliability applications such as pedal, throttle-lever, or actuator position sensing in aircraft, marine, construction, and agricultural vehicles.
RSE 1500 series sensors provide an analog voltage output proportional to shaft rotation over a total range of 120°. They utilize built-in electronics offering DC input/output configurations and are available for 0° to 30°, 60°, 90°, or 120° rotation ranges with a true 0-to-10 V DC unipolar output. Normal electrical I/O termination is a 5-pin M-12 connector receptacle, but on special order for OEMs other connectors or cables can be supplied. Please contact us for more information. RSE 1500 series rotary sensors are enclosed in a 1-1/2 inch diameter anodized aluminum shell, and have a 0.250 inch stainless steel shaft running in high performance ball bearings.
Applications for RSE
- Quarter-turn valves
- Mail sorter gates
- Flue dampers
- Throttle position
- Dancer arm tensioning
- Fuel rack position
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Frequency response | 50 Hz (-3dB) (nominal) |
Full scale output | 0 to 10 Volts DC |
Input power | 13.5 to 26.5 Volts DC, 25 mA max. |
Linearity error | <±0.1% of FRO |
Operating temperature | -40°C to +85°C |
Output | <100 Ω |
Output noise & ripple | <5 mVrms |
Resolution | 0.025% of FRO |
Shock survival | 100 g, 11 ms |
Thermal coefficient of scale factor | ±0.01% FRO/°C (nominal) |
Vibration tolerance | 10 g, 50 to 2000 Hz |
Produits apparentés
Besoin d'autre chose?
SX36RV120 RVDT
- Angular range: 120°
- -40° to +100°C operating temperature
- ±1.5% FS non-linearity
R30D RVDT
- Angular ranges: ±30º (standard), ±40º, ±60º
- Temp. coefficient of sensitivity: 0.07%/ºC
- High level, low noise DC output
R30A RVDT
- Angular range: ±30º to ±60º
- High reliability and performance
- -55°C to +150°C operating temperature