XPM10 Miniature Pressure Sensor
Miniature threaded pressure sensor
Caractéristiques principales
- Measuring ranges from 0 ... 1 bar to 0 ... 350 bar
- Absolute and relative pressure
- Linearity deviation 0.25 % (0.35 % for 1 bar)
- Output signal 10 mV/V (5 mV/V for 1 bar)
- Supply voltage 10 VDC
- Flush diaphragm
- Insensitive to installation torque
- Connection thread M10 x 1
- For static and dynamic applications
General Information
The XPM10 is a miniature metric threaded pressure sensor designed to measure static and dynamic bridges in a wide range of applications. It is also suitable for harsh environmental conditions. It is made of stainless steel (titanium optional) and is available in measurement ranges from 1 bar to 350 bar. The XPM10 uses SanShift™ technology, which largely eliminates zero deviations caused by torques during installation.
The XPM10 pressure transducer is also available with an integrated amplifier. The following amplifiers are available:
A1: output signal 0.5 ... 4.5 V
A2: Output signal ±5 V
A3: Output signal 4 ... 20 mA
Features
- Measuring ranges from 0 ... 1 bar to 0 ... 350 bar
- Absolute and relative pressure
- Linearity deviation 0.25 % (0.35 % for 1 bar)
- Output signal 10 mV/V (5 mV/V for 1 bar)
- Supply voltage 10 VDC
- Optionally with integrated electronics
- Flush diaphragm
- Insensitive to installation torque
- Connection thread M10 x 1
- For static and dynamic applications
- Stainless steel construction
- Optional output 4 ... 20 mA 2-wire
- Optional IP67
Applications
- Hydraulic control processes
- Explosion test benches
- Brake pressure
- Laboratory and research
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Accuracy | 0.25% to 0.35% |
| Dimensions | Hex 15 mm [ Hex .59 in ] |
| Measurement range | 0 - 1 bar to 0 - 350 bar [ 15 up to 5000 psi ] |
| Operating temperature | -40 to 120 °C [ -40 to 250 °F ] for Non Amplified |
| Options | Cable Length, Compensation Temperature Range, Connector Output, IP67 Protection, With Amplification (0.5 - 4.5V), Without Amplification, Zero Shift |
| Output | 12 mV, 4±0.2 V |
| Overpressure | 1.5X FS |
| Port material | Stainless Steel, Titanium |
| Pressure port/fitting | 3/8-24 UNF Male, M10x1 Male |
| Pressure type | gauge, absolute, sealed |
| Supply voltage | 10 V, 10 – 30 V |
Produits apparentés
Besoin d'autre chose?
XPR46 Miniature Pressure Transducer
- Measuring range: 0.5 to 100 bar
- -40°C to +120°C Operating temperature
- Flush diaphragm, titanium construction
