MK-GL240-10K-230 10-Channel Measuring Case
Measuring case for the connection of up to 10 active transducers / sensors
About the MK-GL240-10K-230 10-Channel Measuring Case
The measuring case is intended for the mobile connection of 1 up to 10 active transducers / sensors with analog output voltage (3- or 4-wire technology) or current (2- or 3-wire technology) in conjunction with a data logger of the type GRAPHTEC GL240. The connection of the transducers / sensors takes place via plug connectors. The sensor supply is provided by an internal power supply with a regulated DC voltage of 24 VDC.
In the version for analog output signals of 4 ... 20 mA, internal shunt resistances of 250 ohms enable conversion to the corresponding measuring range of the data logger of 1 ... 5 volts. Further information can be found in the data sheet of the GL240.
The measuring case is supplied with an alternating voltage of 100 to 240 V and 50/60 Hz.
The data logger is mounted on a mounting plate and can also be used separately from the measuring case for other measuring tasks.
If required, the data logger can already be pre-set and preconfigured according to customer requirements.
Note: The data logger with "battery block" for data backup on mains voltage interruption (recommended option), the transducers and required transducer connection cables are not part of the described measuring case and must be ordered separately according to individual requirements. When ordering this measuring case and data logger at the same time, the data logger will already be installed.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Connector for sensor/transducer | 5-pin connector Binder Series 423 |
Dimensions (w x h x d) | 465 x 365 x 180 mm |
Enclosure | Plastic case |
Input signal | 4 - 20 mA (2- or 3-wire technology), 0 - 5 V / 0 - 10 V (3- or 4-wire technology) |
Number of measuring channels | 10 |
Precision shunt resistor | 250 Ohm (0,1%) |
Protection class | IP65 (case closed), IP20 (case opened) |
Sensor/transducer supply voltage | 24 VDC (max. 80 mA) |
Supply voltage | 100 - 240 VAC (50/60 Hz) |
Temperature, operating | 0 - 45°C (5 - 85 % RH) - case with opened lid |