GL7000 Input Modules

GL7-V | GL7-HSV | GL7-HV | GL7-M | GL7-L/P | GL7-DCB | GL7-CHA

About the Input Modules

Voltage Module GL7-V

This is the voltage input module capable to measure voltage for various points of battery pack, electronics circuit, and to measure also voltage of various sensors as displacement, pressure, wind speed, and others. It maintains sampling speed even if the number of modules are increased.

High-speed Voltage Module GL7-HSV

This is the high-speed sampling voltage input module capable to measure high-speed voltage as control signal in inverter-based system, output of sensors in the characteristic test, output of vibration/displacement meter, and others. It can capture the signal by a high resolution using 16-bit converter even if it is sampled at fast speed as maximum 1MS/s (1μs interval).

High Voltage Module GL7-HV

This is the voltage input module capable to measure high voltage as a AC power line or an electric vehicle. It can be measured high voltage as maximum 1000V in at fast speed as maximum 1MS/s (1μs interval). Demand to measure a signal as a control and power line in the inverter-based system used for vehicle and electrical equipment is increased.

Voltage/Temperature Module GL7-M

This is the voltage/Temperature input module capable to measure voltage and temperature in mixed condition as an environmental testing for equipment. It also can be measured the humidity by using the sensor of options that can be driven by a built-in power source.

Input Module GL7-L/P

The Input Logic / Pulse Module is an optional module for data platform GL7000. The module is operated in logic or pulse mode. With pulse mode the following measurement modes are available: rotation, accumulation and instant count.

DC Strain Module GL7-DCB

This is the input module for the sensors based on the strain gauge capable of measuring a variety phenomena as acceleration, pressure, force. It is able to connect the sensor directly and also able to measure the voltage, and resistance. Elements of the bridge circuit for the strain gauge are built in the module, and it also has the excitation power for the strain gauges and sensors. It allows to make easily measurement.

Charge Module GL7-CHA

This is the input module for the sensors based on the piezoelectric elements capable of measuring a variety phenomena as acceleration, pressure, force. It is able to connect the sensor directly and also able to measure the voltage. It supports the TEDS in the sensor and allows to make setup easily.
It supports various filters capable to have high-precision measurement.

 

  • Follow us: