TLB Digitale Versterker
Digital amplifier with analog output signal
About the TLB Digital Amplifier
Weight amplifier and indicator for Omega/DIN rail mounting suitable for back panel; space-saving vertical shape.
Key features TLB
- Six-digit semialphanumeric display (height 8 mm), 7 segment LED
- Four buttons
- Dimensions: 25 x 115 x 120 mm
The instrument is equipped with a RS485 serial port and an analog output:
- RS485 for connection to:
- - PC/PLC up to 32 instruments (max 99 with line repeaters) by ASCII Laumas protocol (compatible with W60000) or ModBus RTU Protocol
- - Remote display
- Optoisolated analog output 16 bit: 0 ... 20 mA; 4 ... 20 mA (max 300 Ohm); 0 ... 10 V; 0 ... 5 V; ±10 V; ±5 V (min 10 kOhm).
Theoretical calibration by using buttons.
Heeft u deze sensor nodig voor uw volgende project?
Vraag vandaag nog een offerte aan of laat uw gegevens achter voor meer informatie van een van onze experts.
Product downloaden
Doe het op uw manier
Niet precies wat u zoekt? Wij bieden standaard sensoren, maar kunnen u ook helpen met voor u aangepaste sensoren of een volledig op maat gemaakte meetoplossing. Neem contact met ons op voor advies of prijzen.
Praat met een expertTechnische specificaties
Specificaties | Waarde |
---|---|
A/d converter | 24 bit (16000000 points) 4.8 kHz |
Digital filter / conversion rate | 0.012 - 7 s / 5 - 300 Hz |
Divisions, max | ±999999 |
Linearity | <0.01% FS |
Linearity of analog output | <0.01% FS |
Load cell sensitivity, max. | ±7 mV/V |
Logic inputs | 2x - optoisolated 5 - 24 VDC PNP |
Logic relay outputs | 3x - max. 115 VAC / 150 mA |
Number of load cells (parallel and supply) | max. 8 (350 Ω); 5 VDC / 120 mA |
Power supply and consumption: | 12 - 24 VDC ±10 %; 5 W |
Rs485 port - baud rate | 2400, 4800, 9600, 19200, 38400, 115200 |