+31 (0)70 392 4421

of bekijk onze locaties

P1600 Strain Gauge Druksensor

Highly precise measurement of wet/dry differential pressures over wide temperature ranges

About the P1600 Strain Gauge Pressure Sensor

P1600 Series Strain Gauge Pressure Transducers are sensors that provide highly precise measurement of wet/dry differential pressures over wide temperature ranges.
Standard versions of this transducer use a 17-4 pH stainless steel diaphragm to sense pressure. The deflection of the diaphragm is transferred to a double cantilever beam by a force transfer rod. Strain in the beam, and therefore, input pressure is measured by four foil strain gauges.
An all-welded construction provides high reliablility and stability. Capable of sensing extremely small changes of applied pressure, the transducers are relatively insensitive to vibration, altitude and shock.
The P1600 Series are available in a range of electrical inputs and outputs.


Key features P1600

  • Bi-directional operation
  • Operation in high temperatures
  • Shock and vibration resistant
  • 2 wire 4-20 mA option: Intrinsic safety approval to EEx ia IIc T4 (Tamb=60°C), BASEFA, CENELEC EN50-020


Applications P1600

  • Military and commercial aircraft
  • Filter blockage detection
  • Process control
  • Valve/position monitoring


Measurement Range
0 - 100 to 0 - 350 mbar (0 - 1.5 to 0 - 5.0 psi)
20 mV, 25 mV, 5 VDC, 2.5 VDC, 4 - 20 mA
Pressure Type
Supply Voltage
10 VDC, 11-18 VDC, 18-32 VDC, 10-36 VDC, ±15 VDC
Line Pressure
20X nominal pressure or 100 psi (7.0 bar) whicher is less
Burst Pressure
P1: >20 x full range pressure, P2: >5 x full range pressure
Media Compatibility
P1: Liquids or gases compatible with 17-4 pH; P2: Must only be connected to dry gas
Operating Temperature
-54°C to 120°C (-65°F to 250°F)
Compensated Temperature
0°C to 100°C (32°F to 212°F)
  • Volg ons: