G623 Onderwater Hoek Tiltsensor
CSA-goedgekeurde intrinsiek veilige onderwatersensor voor gevaarlijke gasatmosferen
About the G623 Submersible Large Angle Tilt Sensor
Intrinsically safe 350bar G623 is CSA approved for use in potentially explosive gas/vapour atmospheres. The G603 is designed for industrial and scientific feedback applications and is ideal for OEMs seeking good sensor performance for harduous applications in hazardous areas.
It is sealed to IP68 350bar (5000psi, 3500m depth).
The G623, like all Positek® sensors, is supplied with the output calibrated to the angle required by the customer, between 15 and 160 degrees and with full EMC protection built in. The sensor provides a linear output characteristic with angle of deflection. There is a machined registration mark to identify the calibrated mid point.
Overall performance, repeatability and stability are outstanding over a wide temperature range.
Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier . Approved galvanic isolation amplifiers (G005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.
The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.
Key features G623
- Intrinsically safe for Gas to: Class I, Zone 0 Ex ia / AEx ia
- Non-contacting inductive technology to eliminate wear
- Angle set to customer’s requirement
- Compact and self-contained
- High durability and reliability
- High accuracy and stability
- Sealing to IP68 350 Bar
Heeft u deze sensor nodig voor uw volgende project?
Vraag vandaag nog een offerte aan of laat uw gegevens achter voor meer informatie van een van onze experts.
Doe het op uw manier
Niet precies wat u zoekt? Wij bieden standaard sensoren, maar kunnen u ook helpen met voor u aangepaste sensoren of een volledig op maat gemaakte meetoplossing. Neem contact met ons op voor advies of prijzen.
Praat met een expertTechnische specificaties
| Specificaties | Waarde |
|---|---|
| Damping ratio | 0.2 : 1 (0.6 nom. @ 25°C |
| Dimensions | Body Diameter 40 mm, Flange 69 mm | Body Length (to seal face) 81 mm |
| Drawing list | G623-11 Sensor Outline |
| Emc performance | EN 61000-6-2, EN 61000-6-3 |
| Environmental temperature limits | Operating -4°C to +50°C | Storage -4°C to +50°C |
| Independent linearity/hysteresis | (combined error) < ± 0.25° - up to 100° |
| Intrinsic safety | Class I, Zone 0 | Ex ia IIC T4 (Ta = -40°C to +80°C) | AEx ia IIC T4 (Ta = -40°C to +80°C) |
| Mtbf | 350,000 hrs 40°C Gf |
| Noise | < 0.02% FSO |
| Output signal | 0.5-4.5V dc ratiometric, Load: 5kΩ min. |
| Power supply | +5V dc nom. ± 0.5V, 10mA typ 20mA max |
| Resolution | Infinite |
| Response time | 250 mS @ 20°C typ. |
| Sealing | IP68 350Bar |
| Shock | IEC 68-2-29: 40 g |
| Temperature coefficients | < ± 0.01%/°C Gain & | < ± 0.01%FS/°C Offset |
| Vibration | IEC 68-2-6: 10 g |
Gerelateerde producten
Heeft u iets anders nodig?
X623 Onderwater Hoek Tiltsensor
- Intrinsiek veilig voor gas naar: Ex II 1G
- Contactloze inductieve technologie om slijtage te elimineren
- Hoek ingesteld op klantwens