NM2-IP2-2L Tilt Meetsysteem
Tweeassig kantelmeetsysteem in een compacte aluminium behuizing
Belangrijkste kenmerken
- Measuring range ±3° up to ±45° per axis
- Accuracy ±0.1° (up to ±10°), ±0.2° (up to ±30°),±0.25° (up to ±45°)
- Analogue output 4 - 20 mA (2-wire-technology)
- Supply voltage 18 - 28 VDC
About the NM2-IP-2L Tilt Measuring System
The dual axis industrial tilt measuring system NM2-IP-2L is the combination of two non-contact inclination sensors and sensor adapted electronics. The measuring system is designed for precise tilt measurement in X- and Y-axis and intended for ground assembly. Available tilt measuring ranges are ±3° to ±45°. The two analogue output signals of 4 ... 20mA in 2-wire-technology are standard signals and therefore a further analysis is easily feasible.
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments. Furthermore, the built-in electronics are protected against humidity and vibrations.
Heeft u deze sensor nodig voor uw volgende project?
Vraag vandaag nog een offerte aan of laat uw gegevens achter voor meer informatie van een van onze experts.
Product downloaden
Doe het op uw manier
Niet precies wat u zoekt? Wij bieden standaard sensoren, maar kunnen u ook helpen met voor u aangepaste sensoren of een volledig op maat gemaakte meetoplossing. Neem contact met ons op voor advies of prijzen.
Praat met een expertTechnische specificaties
Specificaties | Waarde |
---|---|
Accuracy at 23°c | Up to ±10°: ±0.1° ; Up to ±30°: ±0.2° ; Up to ±45°: ±0.25° |
Analogue output / burden | 4 - 20 mA (2-wire), max burden depending on supply voltage |
Cross-sensitivity | < 1.5% at 30° |
Dimensions (w x h x d) | ca. 160 x 65 x 86 mm (without EMC cable gland) |
Electrical connection | M16 x 1.5 EMC cable glands on internal spring-cage terminal blocks |
Enclosure | EMC-safe aluminium die-cast enclosure |
Frequency range (-3db) | 0.5 Hz |
Number of measuring axis | 2 |
Power consumption | ca. 2 W |
Preferred measuring range | ±3°, ±5°, ±10°, ±15°, ± 20°, ±30°, ±45° (other measuring ranges for both axis as well as different measuring ranges for each axis (e.g. X: ±30° Y: ±3°) on request possible) |
Protection class | IP66 |
Supply voltage | 18 - 28 VDC |
Temperature, operating | -20 to +60 °C |
Temperature, storage | -20 to +60 °C |
Weight | ca. 1000 g |
Gerelateerde producten
Heeft u iets anders nodig?
NM2-IP-4L Tilt Meetsysteem
- Meetbereik ±3° tot ±60° of 0 - 90°
- Tweeassig kantelmeetsysteem
- Robuuste EMC-veilige aluminium behuizing IP66
NSS1-IP Tilt Meetsysteem
- Meetbereik ±3° tot ±60° of 0 tot 90°
- Schakelnauwkeurigheid max. 0,5%
- Met 2 schakelcontacten
NSS2-M2-IP Tilt Meetsysteem
- Meetbereik ±3° tot ±10°
- Met 2 schakelcontacten per as
- Robuuste EMC-veilige aluminium behuizing IP66