NM2-IP-4L Tilt Meetsysteem
Tweeassig kantelmeetsysteem
Belangrijkste kenmerken
- Measuring range ±3° up to ±60° or 0 - 90° per axis
- Accuracy ±0,1° (up to ± 15°), 0,5% of measuring range (up to ±60°)
- Analogue output 0 … (±)10 V or 0(4) … 20 mA (4-wire-technology)
- Supply voltage 10 … 18 VDC or 18 … 30 VDC
About the NM2-IP-4L Tilt Measuring System
The dual axis industrial tilt measuring system NM2-IP-4L is the combination of a non-contact inclination sensor AccuStar®-EA and sensor adapted electronics. The measuring system is designed for precise tilt measurement in X- and Y-axis and intended for ground assembly. Available tilt measuring ranges are ±3° to ±60°. The electrical wiring is realized in 4-wire-technology. For further evaluation of the measured inclination there are different standard analogue output signals per axis available, depending on the ordered type.
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments.
Heeft u deze sensor nodig voor uw volgende project?
Vraag vandaag nog een offerte aan of laat uw gegevens achter voor meer informatie van een van onze experts.
Product downloaden
Doe het op uw manier
Niet precies wat u zoekt? Wij bieden standaard lineaire potentiometers, maar kunnen je ook helpen met een op maat gemaakte lineaire positiesensor of een complete meetoplossing. Neem contact met ons op voor advies of prijzen.
Praat met een expertTechnische specificaties
Specificaties | Waarde |
---|---|
Accuracy at 23°c | Up to ±15°: ±0,1°, Up to ±60°: 0,5% of measuring range, Up to ±65°: on request |
Analogue output / burden | 0 - 10 V / ±10 V, max. 1 mA (short-time short-circuit proof) 0 - 20 mA, 4 - 20 mA, max. 500 Ω |
Cross-sensitivity | < 1% up to ±60° |
Dimensions (w x h x d) | 160 x 91 x 160 mm (without EMC cable glands) |
Electrical connection | M16 x 1,5 EMC cable glands on internal spring-cage terminal blocks |
Enclosure | EMC-safe aluminium die-cast enclosure |
Frequency range (-3 db) | 2 Hz |
Number of measuring axis | 2 |
Power consumption | ca. 4 W |
Preferred measuring range | ±3°, ±5°, ±10°, ±15, ± 20, ±30, ±45°, ±60° other measuring ranges on request |
Protection class | IP66 |
Supply voltage | 10 - 18 VDC*, 18 - 30 VDC*, electronic is protected against voltage reversal |
Temperature, operating | -20 - +60 °C |
Temperature, storage | -20 to +60 °C |
Voltage insulation between supply voltage and analogue output | Galvanic isolation between supply voltage and analogue output, 200 V, higher voltage insulation on request |
Weight | 2.300 g |
Gerelateerde producten
Heeft u iets anders nodig?
NSS1-IP Tilt Meetsysteem
- Meetbereik ±3° tot ±60° of 0 tot 90°
- Schakelnauwkeurigheid max. 0,5%
- Met 2 schakelcontacten
NSS2-M2-IP Tilt Meetsysteem
- Meetbereik ±3° tot ±10°
- Met 2 schakelcontacten per as
- Robuuste EMC-veilige aluminium behuizing IP66
NSZ1-IP Tilt Meetsysteem
- Meetbereik ±3° tot ±60° of 0 tot 90°
- Met 2 schakelcontacten & schakelvertraging
- Voor ruwe en industriële omgevingen