+31 (0)70 392 4421

of bekijk onze locaties

ALF325 Bending Beam Krachtsensor

Ontworpen en gebouwd om te voldoen aan de behoeften van machinebouwers

About the ALF325 Bending Beam Force Sensor

This high precision web tension loadcell is designed and built to meet the needs of machine designers, installation fitters and end users by the incorporation of alignment features with maximum flexibility. The high performance of this loadcell is not compromised by the relatively large errors that can be produced by imprecise installation.

There is a maximum supported moment for each range. Standard ALF325 loadcells can withstand full rated load at half a metre full cantilever.

Features ALF325

  • High accuracy web tension loadcell
  • Full load range: 50-500N; smaller/larger ranges possible
  • Overload-stop
  • Rated output: 1,2mV/V nomival
  • Non-lin./hysteresis: 0.03/0.03% RL
  • High structural stiffness
  • Very high precision
  • Precision alignment tool facility
  • Standard bearing mounting
  • Mounting foot provision
  • Optional mounting flange

Specificaties

Measurement range
50N, 100N, 200N, 500N
Non-linearity - Terminal
±0.03% RL
Hysteresis
±0.03% RL
Creep - 20 minutes
±0.05% AL
Repeatability
±0.01% RL
Rated output - Nominal
1.2mV/V
Rated output - Rationalised
1.0mV/V
Load direction
Compression
Rationalisation tolerance
±0.1% RL
Zero load output
±4% RL
Temperature effect on rated output per °C
±0.005% AL
Temperature effect on zero load output per °C
±0.01% RL
Temperature range - Compensated
-10 to +50°C
Temperature range - Safe
-10 to +80°C
Excitation voltage - Recommended
10V
Excitation voltage - Maximum
10V
Bridge resistance
350Ω
Insulation resistance - Minimum at 50Vdc
500 MΩ
Overload - Safe
50% RL
Overload - Ultimate
200 % RL
Weight - Nominal (excluding cable)
380g
  • Volg ons: