FCP30A Single-turn Rotatie Potentiometer
1-turn Potentiometer - Geleidende kunststof (Servomount)
Belangrijkste kenmerken
- Conductive plastic
- Dimensions D x L (mm): 27x15
- Standard Resistance Range 1 Ω to 10 kΩ
- Independent Linearity (± %): 1.0 to 0.2
- Mechanical travel (+10° 0°): 360°
- Electrical travel (±5°): 340° ±5°
About the FCP30A Single-turn Potentiometer- Conductive plastic (Servomount)
The FCP30A is a servomount type potentiometer with ball bearings, a 27mm outer diameter and turret side terminals.
Special Specifications Available
Extra taps (available up to 1 tap), multi-ganged (available up to 5 gangs, housing length is extended by 8.5mm per 1 gang), shaft with front and rear extension (rear shaft with 3mm dia. and 10mm length), with stopper (rotating angle becomes 320º and stopper strength is 0.3N·m [3kgf·cm]), special electrical travel, shaft dia. (ø3.175mm) with inch dimensions, special machining on the shaft.
Heeft u deze sensor nodig voor uw volgende project?
Vraag vandaag nog een offerte aan of laat uw gegevens achter voor meer informatie van een van onze experts.
Product downloaden
Doe het op uw manier
Niet precies wat u zoekt? Wij bieden standaard lineaire potentiometers, maar kunnen je ook helpen met een op maat gemaakte lineaire positiesensor of een complete meetoplossing. Neem contact met ons op voor advies of prijzen.
Praat met een expertTechnische specificaties
Specificaties | Waarde |
---|---|
Contact resistance variation | Within 2% C.R.V. |
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 340º ±5º |
Independent linearity tolerance | Standard Class ±1.0%, Precision Class ±0.5%, Super precision Class ±0.2% |
Insulation resistance | Over 1,000MΩ at 1,000 V.D.C |
Mass | Approx. 30g |
Mechanical travel | 360º (Endless) |
Output smoothness | Within 0.1% against input voltage |
Power rating | 1.5W |
Resistance temp. coefficient | ±400p.p.m./ºC |
Resolution | Essentially infinite |
Shaft diameter (mm) | 3 |
Special practical resistance values | 500, 20k, 50k, 100k (Ω) |
Standard resistance values | 1k, 2k, 5k, 10 k (Ω) |
Starting torque | Within 2mN·m (20gf·cm) |
Total resistance tolerance | Standard Class ±10% (K) |
Gerelateerde producten
Heeft u iets anders nodig?
FCP40A Single-turn Rotatie Potentiometer
- Servomount - Geleidende kunststof
- Afmetingen (D x L) 36,5x18 mm
- Standaard weerstandsbereik 1 tot 10 kΩ
FCP50A Single-turn Rotatie Potentiometer
- 51 mm buitendiameter
- Servomount-type met kogellagers
- Diverse speciale specificaties beschikbaar
CP22C Single-turn Rotatie Potentiometer
- Voordelige potentiometer met metalen behuizing
- Onafhankelijke lineariteit ±0,5% tot ±0,25%
- Weerstandsbereik 50 tot 10 kΩ