20HP Multi-turn Rotatie Potentiometer
Multi-turn draadgewonden type busmontage
Belangrijkste kenmerken
- Wirewound
- Dimensions (mm) DxL: 20×18 / 20×25.5
- Resistance range (ohm): 100Ω -50kΩ / 100Ω -100kΩ
- Linearity (±%): 0.3 to 0.2 /0.2 to 0.1
- Mechanical travel (+10° 0°): 1,800 / 3600
- Electrical travel (±5°): 1,800 / 3600
About the 20HP Multi-turn Potentiometer
The 20HP is a precision multi-turn potentiometer with an outer diameter of 20mm. Servomount type and with limit-switch is also available.
Features Multi-turn potentiometer 20HP-5S
- Wirewound
- Dimensions (mm) DxL: 20×18
- Standard resistance range (ohm): 100Ω -50kΩ
- Independent linearity (±%): 0.3 to 0.2
- Mechanical travel (+10° 0°): 1,800
- Electrical travel (±5°): 1,800
Features Multi-turn potentiometer 20HP-10S
- Wirewound
- Dimensions (mm) DxL: 20×25.5
- Standard resistance range (ohm): 100Ω -100kΩ
- Independent linearity (±%): 0.2 to 0.1
- Mechanical travel (+10° 0°): 3600
- Electrical travel (±5°): 3600
Special Specifications Available
3turn type (S20HP3S), lower resistance values (10Ω, 20Ω, 50Ω), extra taps (available up to 1 tap), multiganged (available up to 2 gangs), shaft with front and rear extension (rear shaft with 2mm dia. and 10mm length), shaft dia. (ø6.35mm) · bushing with inch dimensions, special machining on the shaft, simple sealed housing (expect servomount type), slippingclutch incorporated type (S20HP10S1782, 20mN·m~60mN·m), with a limitswitch adaptor, with pin terminals for p.c. board (20HP-5P, 20HP-10P).
Heeft u deze sensor nodig voor uw volgende project?
Vraag vandaag nog een offerte aan of laat uw gegevens achter voor meer informatie van een van onze experts.
Product downloaden
Doe het op uw manier
Niet precies wat u zoekt? Wij bieden standaard lineaire potentiometers, maar kunnen je ook helpen met een op maat gemaakte lineaire positiesensor of een complete meetoplossing. Neem contact met ons op voor advies of prijzen.
Praat met een expertTechnische specificaties
Specificaties | Waarde |
---|---|
(within 5kΩ): (±0.25%) (±0.15%) | |
Precision Class: ±0.2% ±0.1% | |
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 360º Xn ±5º (n: No. of turns) |
Independent linearity tolerance (5-turn 10-turn) | Standard Class: ±0.3% ±0.2% |
Insulation resistance | Over 100 MΩ at 1,0000 V.D.C. |
Mass | Approx. 25g (5-turn), Approx. 30g (10-turn) |
Max. practical resistance value | 100kΩ (5turn), 150kΩ (10turn) |
Max. working voltage | 900V |
Mechanical travel | 360º Xn + 1 0 (n: No. of turns) |
Noise | Within 100O E.N.R. |
Power rating | 1.0W (5-turn) 2.0W (10-turn) |
Resist. temp. coefficient of wire | ±20p.p.m./ºC |
Shaft dia. (mm) | 6 |
Standard resistance range | 100Ω to 50kΩ (5turn), 100Ω to 100kΩ (10turn) |
Starting torque | Within 5mN·m (50gf·cm) (Bushingmount type), Within 3mN·m (30gf·cm) (Servomount type) |
Stopper strength | Approx. 0.9N·m (9kgf·cm) (Bushingmount type), Approx. 0.6N·m (6kgf·cm) (Servomount type) |
Total resistance tolerance | Standard Class ±3%(H), Precision Class ±1%(F) |
Gerelateerde producten
Heeft u iets anders nodig?
20HPS Multi-turn Rotatie Potentiometer
- Meetbereik 3, 5 of 10
- Weerstandsbereik 20 Ω tot 100 kΩ
- 20 mm buitendiameter
22HP Multi-turn Rotatie Potentiometer
- Meetbereik 1 tot 8 omwentelingen
- Standaard afmetingen 22×19 mm
- Goedkoopste multi-turn potentiometer
25HP Multi-turn Rotatie Potentiometer
- Meetbereik 3, 5, 10, 15 of 20 slagen
- Standaard weerstandsbereik 100Ω-100kΩ
- Onafhankelijke lineariteit ±0,3% tot ±0,1%