22HP Multi-turn Rotatie Potentiometer
Draadgewonden (Busingmount) Goedkoop artikel - RoHS-conform
Belangrijkste kenmerken
- Wirewound
- Dimensions (mm) DxL: 22×19
- Resistance range (ohm): 100Ω -50kΩ
- Linearity (±%): 0.3 to 0.2
- Mechanical travel (+10° 0°): 1,800
- Electrical travel (±5°): 1,800
About the 22HP Multi-turn Potentiometer
The 22HP is our lowest-cost multi-turn potentiometer with an outer diameter of 22mm. This potentiometer has an international patented snapping-in construction.
Features Multi-turn potentiometer 22HP-5
- Wirewound
- Dimensions (mm) DxL: 22×19
- Standard resistance range (ohm): 100Ω -50kΩ
- Independent linearity (±%): 0.3 to 0.2
- Mechanical travel (+10° 0°): 1,800
- Electrical travel (±5°): 1,800
Special Specifications Available
Shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), multi-ganged (available up to 10 gangs), with high torque, special shaft dia. (ø3mm, ø3.175mm, ø4mm, ø5mm), special machining on the shaft, with plastic shaft, metal bushing type (22HPM-n with anti-rotation pin), 1, 2, 3, 4, 6, 7 and 8-turn versions are available (these versions have the same outer dimensions, but general specifications are please request us for details), simple sealed housing, slippingclutch incorporated type (20mN·m~60mN·m), extra taps (available up to 1 tap only for 10-turn model), servomount type (same dimensions as 22HHPS-10).
Heeft u deze sensor nodig voor uw volgende project?
Vraag vandaag nog een offerte aan of laat uw gegevens achter voor meer informatie van een van onze experts.
Product downloaden
Doe het op uw manier
Niet precies wat u zoekt? Wij bieden standaard sensoren, maar kunnen u ook helpen met voor u aangepaste sensoren of een volledig op maat gemaakte meetoplossing. Neem contact met ons op voor advies of prijzen.
Praat met een expertTechnische specificaties
| Specificaties | Waarde |
|---|---|
| (within 5kΩ): (±0.25%) (±0.15%) | |
| Bushing: Glass-filled nylon (for ganged version the bushing is metalbrass without plating) | |
| Housing case: Glass-filled nylon | |
| Precision Class: ±0.2% ±0.1% | |
| Terminals: Gold-plated brass (all terminals can be Fitted with the AMP 110 series faston receptable (2.8x0.5mm) or equivalents | |
| Dielectric strength | 1 minute at 1,000 V.A.C. |
| Electrical travel | 360º Xn ±5º (n: No. of turns) |
| Independent linearity tolerance (5-turn 10-turn) | Standard Class: ±0.3% ±0.25% |
| Insulation resistance | Over 1,000MΩ at 500 V.D.C. |
| Mass | Approx. 20g (both 5-turn and 10-turn) |
| Materials | Shaft: Stainless steel |
| Max. torque exerted on fastening the mounting nut to the bushing | Within 1.0N·m (10kgf·cm) (in case of panel thickness with over 2.5mm, the rotating torque may become heavier) |
| Max. working voltage | 250V |
| Mechanical travel | 360º Xn (+10º n: No. of turns) |
| Noise | Within 100Ω E.N.R. |
| Power rating | 1.0W (5-turn), 2.0W (10-turn) |
| Resist. temp. coefficient of wire | ±20p.p.m./ºC |
| Shaft dia. (mm) | 6 |
| Standard resistance range | 100Ω to 50kΩ (5turn), 100Ω to 100kΩ (10turn) |
| Starting torque | Within 10mN·m (100gf ·cm) |
| Stopper strength | Approx. 0.35N·m (3.5kgf·cm) |
| Total resistance tolerance | Standard Class ±3%(H), Precision Class ±1%(F) |
Gerelateerde producten
Heeft u iets anders nodig?
25HP Multi-turn Rotatie Potentiometer
- Meetbereik 3, 5, 10, 15 of 20 slagen
- Standaard weerstandsbereik 100Ω-100kΩ
- Onafhankelijke lineariteit ±0,3% tot ±0,1%
25HPS Multi-turn Rotatie Potentiometer
- Meetbereik 3, 5, 10, 15 of 20 slagen
- Standaard afmetingen 25 mm × 30,5 / 39 mm
- Diverse speciale specificaties beschikbaar
46HD Multi-turn Rotatie Potentiometer
- Meetbereik 3, 5, 10, 15, 20 of 30 omwentelingen
- Weerstandsbereik 10Ω -20kΩ tot 50Ω -200kΩ
- 46 mm buitendiameter