+31 (0)70 392 4421

of bekijk onze locaties

ATF310 Axiale Kracht-Moment Sensor

Meerassige Kracht en Moment/Torque Transducer

About the ATF310 Force-Torque Sensor

The ATF310 force-torque sensor measures force and torque in the same axis with minimal cross talk providing user friendly outputs for direct measurement without mathematical manipulation.

Each channel may be calibrated bi-directionally. The version of the transducer was developed for an OEM producing texture analyser machines (rheometers) for use in the food process industry.

 

Key features ATF310

  • Measurement range ±50 N and 2 Nm
  • Tension / compression
  • Non-linearity ±0.05 % RL
  • Output signal 0.6 mV/V or rationalised 0.5 mV/V ±0.5 %
  • Supply voltage 10 VDC
  • Low cross talk
  • Custom ranges
  • Simple installation
  • Direct output from each axis without calculation
  • Traceable calibration with certificate

 

Specificaties

Rated load
50 N
Rated torque
2 Nm
Non-linearity, terminal
±0.05 % RL
Hysteresis
±0.05 % RL
Creep, 5 min
±0.1 % AL
Repeatability
±0.05 % RL
Maximum cross talk
1 % RL
Rated output, nominal
0.6 mV/V
Rated output, rationalised
0.5 mV/V ±0.5 % RL Rationalisation tolerance applies to single direction calibrations only
Zero load output
±4 % RL
Temperature effect on rated output
±0.005 % AL/K
Temperature effect on zero load output
±0.02 % RL/K
Compensated temperature range
-10 - +50 °C
Operating temperature range
-10 - +80 °C
Supply voltage, recommended
10 V
Supply voltage, max.
10 V
Bridge resistance
350 Ω
Insulation resistance, minimum at 50 VDC
500 MΩ
Overload, safe
150 % RL
Overload, ultimate
400 % RL
Dynamic load capacity
70 % RL
Weight (excl. cable)
approx. 250 g
Material
Aluminium
Notes: 1. RL = rated load 2. AL = applied load 3. Temperature coefficients apply over the compensated range. 4. Values apply to force and moment in all load combinations. 5. Extraneous forces or torques other than those calibrated may create moment errors.
  • Volg ons: