786-500-D2 Lage Frequentie (Seismische) Vibratiesensor
Bovenuitgang, breedband hoge gevoeligheid, laagfrequente sensor, MIL-C-5015 connector, 500 mV/g, ±5% gevoeligheidstolerantie
About the 786-500-D2 Low Frequency (Seismic) Vibration Sensors
Top-exit broadband sensor is certified for usage in hazardous areas. The high-sensitivity accelerometer offers an interior sensing element capable of producing 500 mV/g outputting clear signals at low vibration levels. The low-end frequency response makes it ideal for slow-speed applications such as wind turbine generators and cooling towers. A high top-end frequency response offers clear signals for early bearing fault detection, gearbox wear, and other high-speed applications. The 786-500-D2 is classifed for usage in Class I Division 2/Zone 2 locations where ignitable gases, vapors or liquids are handled, processed or used but are not usually present during normal operation and can only escape through accidental rupture, breakdown or leaks.
Key features 786-500-D2
- High sensitivity
- Extended low frequency response
- Clear signals at low vibration levels
- Class I, Div 2/Zone 2 certified, non-incendive
- Hermetically sealed
- ESD protected
- Reverse wiring protection
- Manufactured in an approved ISO 9001 facility
Heeft u deze sensor nodig voor uw volgende project?
Vraag vandaag nog een offerte aan of laat uw gegevens achter voor meer informatie van een van onze experts.
Product downloaden
Doe het op uw manier
Niet precies wat u zoekt? Wij bieden standaard sensoren, maar kunnen u ook helpen met voor u aangepaste sensoren of een volledig op maat gemaakte meetoplossing. Neem contact met ons op voor advies of prijzen.
Praat met een expertTechnische specificaties
Specificaties | Waarde |
---|---|
Connector orientation | Top exit |
Connector style | MIL-C-5015, 2-pin |
Frequency response | 0.2 Hz - 14,000 Hz |
Full-scale range | 10 g peak |
Hazardous area approvals | Class I, Div 2, Zone 2; ATEX II 3G Ex nA |
Mounting thread | 1/4-28 UNF tapped hole |
Resonance frequency | 30 kHz |
Sensitivity | 500 mV/g |
Sensitivity tolerance | ±5 % |
Sensor output | Dynamic vibration (IEPE) |
Temperature range | -50°C to +120°C |
Weight | 90 grams |