AZL Single Point Loadcell (ATEX)
Voor platforms 400 x 400 mm
Belangrijkste kenmerken
- Range: 10 to 100kg
- Aluminium alloy loadcell
- Combined error < +/- 0.02% (0.017% C4)
- Protection class IP65
- Accuracy class C3 (OIML R60)
- AZL 15, 20, 30, 50: Class C3/C4
Heeft u deze sensor nodig voor uw volgende project?
Vraag vandaag nog een offerte aan of laat uw gegevens achter voor meer informatie van een van onze experts.
Product downloaden
Doe het op uw manier
Niet precies wat u zoekt? Wij bieden standaard sensoren, maar kunnen u ook helpen met voor u aangepaste sensoren of een volledig op maat gemaakte meetoplossing. Neem contact met ons op voor advies of prijzen.
Praat met een expertTechnische specificaties
Specificaties | Waarde |
---|---|
Combined error | ≤±0.02% | ≤±0.017% |
Compensated temperature range | -10 °C / +40 °C |
Creep at nominal load in 30 minutes | 0.02% |
Deflection at nominal load | 0.5 mm |
Input resistance | 409 Ω ±6 |
Insulation resistance | ≥5000 MΩ |
Material | Aluminum alloy |
Max supply voltage without damage | 18 V |
Minimum verification interval (v min) | E max / 12000 | E max / 15000 |
Nominal load (e max) | 10 - 15 - 20 - 30 - 50 - 100 kg | 15 - 20 - 30 - 50 kg |
Oiml r60 accuracy class • verification intervals | C3 • 3000 | C4 • 4000 |
Operating temperature range | -35 °C / +65 °C |
Output resistance | 350 Ω ±3 |
Protection class | IP65 |
Rated output | 2 mV/V ±10% |
Safe overload (% of full scale) | 150% |
Temperature effect on span | 0.0014% °C |
Temperature effect on zero | 0.0017% °C |
Ultimate overload (% of full scale) | 300% |
Zero balance | ≤±1% |
Gerelateerde producten
Heeft u iets anders nodig?
AZLI Single Point Loadcell (ATEX)
- Bereik: 10 tot 50 kg (platforms 400 x 400 mm) en 100 tot 500 kg (platforms 800 x 800 mm)
- 17-4 PH Roestvrijstalen constructie
- Gecombineerde fout < +/- 0,02% (0,017% C4)
AZS Single Point Loadcell (ATEX)
- Bereik: 10 tot 200 kg
- RVS AISI 420
- Gecombineerde fout < +/- 0,003%
PTC Single Point Loadcell (ATEX)
- Bereik: 30 tot 150kg
- RVS AISI 420 constructie
- Gecombineerde fout < +/- 0,02%