+31 (0)70 392 44 21

Visit our location page for your nearest Althen location.

sales@althen.nl

Visit our location page for your nearest Althen location.

ASC P101A15 Piezoresistive Accelerometer

Analog voltage output acceleration sensor for general purpose vibration and shock monitoring applications

Information & Quotation

Do you need budgetary pricing or have questions about this product? Let us know how we can help you!

About the ASC P101A15

ASC’s General Purpose IEPE accelerometers are made of piezoelectric ceramics and are usable over a wide frequency range from 0.3Hz to 10kHz. The accelerometers are IEPE (Integrated Electronics PiezoElectric) sensors that produce an output voltage proportional to the input acceleration. The sensors feature a built-in preamplifier and a charge to voltage converter that transforms the high-impedance charge output from the piezoelectric ceramic (Lead Zirconate Titanate, PZT) into a low-impedance voltage output that is suitable to drive long cables. ASC’s IEPE sensors operate on a 2-10mA constant-current supply and use a two-wire coaxial cable for power input and signal output.

ASC’s General Purpose IEPE accelerometers, P101A15 and P101A25, are analog voltage output sensors. These piezoelectric vibration sensors are used typically in general purpose vibration and shock monitoring applications. The sensors are based on a piezoelectric annular shear design, which provides excellent immunity against base strain and temperature transients.

ASC Type P101A15 has a side exit connector and Type P101A25 has a top exit connector. ASC’s General Purpose accelerometers, P101A15 and P101A25, feature a rugged stainless steel housing that is corrosion proof and chemical resistant. ASC Type P101A15 and P101A25 operate over a wide temperature range from -55°C to +125°C. Both sensors incorporate a welded hermetic construction and can withstand shocks up to 5000g’s. The industry standard 10-32 coaxial connectors with side and top exit options provide flexibility in mounting. The
sensors are available with built-in TEDS.

Key features ASC P101A15

  • Uniaxial
  • IEPE (Integrated Electronic Piezoelectric)
  • Stainless Steel Housing
  • Voltage Output
  • ±50g, ±100g, ±500g and ±1000g Dynamic Ranges
  • Stud Mount
  • Side Connector or Top Connector
  • Hermetically Sealed
  • High Resonance Frequency (>50kHz)
  • Wide Bandwidth (±1dB, 10kHz)
  • Light Weight (<10 grams)
  • -55° to +125°C Operating Range
  • Annular Shear Design
  • TEDS

Options ASC P101A15

  • Customised Cable Length
  • DAkkS Calibration

Applications ASC P101A15

  • General Purpose Vibration & Shock Monitoring
  • Test & Measurement Applications
  • Modal Applications
  • High-Frequency Applications
  • Specifications
  • Datasheets
Specifications
Measurement Range (g)
±50 | ±100 | ±500 | ±1000
Sensitivity (±10% | mV/g)
100 | 50 | 10 | 5
Frequency Response (Hz)
±5%: 0.5 to 6k 0.5 to 8k | ±1dB: 0.3 to 10k
Resonance Frequency (kHZ)
>50
Transverse Sensitivity (%)
<5
Shock Limit (±g)
5000
Supply Voltage (V DC)
18 to 30
Operating & Storage (°C)
-55 to +125
Weight (gram, without cable)
ASC P101A15: 8.6 | ASC P101A25: 7.3
Datasheets
Downloads

Information & Quotation

Do you need budgetary pricing or have questions about this product? Let us know how we can help you!

Share this page by:
  • Follow us: