ALF216 Cylindrical Force Sensor
Designed for easy installation
Key features
- Full load range: 5kN, 10kN, 20kN, 40kN
- Non-lin./hysteresis: 0.5/0.5% RL
- Hardened stainless steel body
- High mechanical stiffness
- Flying lead
- Small size
About the ALF216 Cylindrical Force Sensor
The ALF216 is ideally suited to engineering force measurements. It is designed for easy installation, usually between two flat faces bearing on its loading rings.
The small size of this loadcell makes it an ideal force sensor for mounting in existing machinery. It has been used in presses and printing machines.
We are happy to design variants of this loadcell to meet your specific requirements.Versions can be manufactured for fully compensated operation up to +250°C. Please consult our engineering department.
Geometry: Axial strain cylinder in weather sealed case, with raised end load bearing faces. For use in compression.
All standard ranges are manufactured in stainless steel.
Notes
1. AL = Applied load. 3. Temperature coefficients apply over the compensated range.
2. RL = Rated load. 4. The load must be applied directly through the central loading axis.
Connections
The loadcell is fitted with 2 metres of PVC insulated 4 core screened cable type 7-2-4C.
Excitation + = Red Signal + = Yellow Screen = Orange
Excitation - = Blue Signal - = Green
The screen is not connected to the loadcell body.
Do you need this sensor for your next project?
Request a quotation today or leave your details to recieve more information from one of our experts.
Product downloads
Have it your way
Not exactly what you’re looking for? We offer standard sensors but can also help you with a tailor-made sensor or a complete measuring solution. Please contact us for advice or budgetary pricing.
Talk to an expertTechnical Specifications
| Specification | Value |
|---|---|
| Bridge resistance | 700 Ω |
| Creep - 20 minutes | ±0.05% AL |
| Excitation voltage - maximum | 20V |
| Excitation voltage - recommended | 10V |
| Hysteresis | ±0.5% RL |
| Insulation resistance - minimum at 50vdc | 500 MΩ |
| Load direction | Compression |
| Measurement range | 5kN, 10kN, 20kN, 40kN |
| Non-linearity - terminal | ±0.5% RL |
| Overload - safe | 50% RL |
| Overload - ultimate | 400% RL |
| Rated output - nominal | 1.2mV/V |
| Rated output - rationalised | 1.0mV/V |
| Rationalisation tolerance | ±0.5% RL |
| Repeatability | ±0.02% RL |
| Sealing | IP65 |
| Temperature effect on rated output per °c | ±0.005% AL |
| Temperature effect on zero load output per °c | ±0.03% RL |
| Temperature range - compensated | -10 to +50°C |
| Temperature range - safe | -10 to +80°C |
| Weight - nominal (excluding cable) | 90 to 100g |
| Zero load output | ±4% RL |
Related products
Need something else?
ALF245 Axial Compensated Force Sensor
- Measuring range: ~100 N to ~800 N
- Compact axial geometry
- Ideal for low range force measurements