H115 (Submersible) Linear Inductive Position Sensor

Very robust, the body and push rod being made of stainless steel

About the H115 (Submersible) Linear Inductive Position Sensor

The H115 is a heavy-duty version of the H114 sensor with a stronger 12.6mm push rod, recommended for applications where vibration is an issue or there is a need for longer travel sensors which are to be mounted horizontally between rod eyes. It remains an affordable, durable, high-accuracy position sensor designed for applications where the sensor would be completely submerged during normal operation.

The incorperated electronics system is CSA approved for use in potentially explosive gas/vapour and dust atmospheres.

Overall performance, repeatability and stability are outstanding over a wide temperature range. It provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 5mm to 800mm and with full EMC protection built in.

The sensor is very robust, the body and push rod being made of 316 stainless steel for long service life and environmental resistance.

The sensor is easy to install with mounting options including stainless steel M8 rod eye bearings and body clamps. The push rod can be supplied free or captive, with female M8 thread, an M8 rod eye, or dome end. Captive push rods can be sprung loaded, in either direction. Environmental sealing is to IP68 10 Bar.

Features H115

  • Intrinsically safe for Gas and Dust to: Class I, Zone 0 Ex ia / AEx ia
  • Non-contacting inductive technology to eliminate wear
  • Travel set to customer's requirement
  • Compact and self-contained
  • High durability and reliability
  • High accuracy and stability
  • Sealing to IP68 10 Bar

As a leading supplier of linear, rotary, tilt and intrinsically safe position sensors, Althen has the expertise to supply a sensor to suit a wide variety of applications.

Specifications

Measurement range
Up to 800mm
Independent linearity
±0.1% to ±0.5%
Output signal
0.5-4.5VDC ratiometric
Frequency response
>10KHz (-3dB)
Body diameter
35mm
Sealing
IP68 10bar, 100msw, 145psi
  • Follow us: