HI2200 | HI2300 High-Temperature Pressure Sensors

High-temperature pressure transducers in silicon-on-sapphire technology

About the HI2200 | HI2300 High-Temperature Pressure Sensors

The unique Silicon-on-Sapphire sensor technology provides outstanding performance and gives excellent stability over a wide temperature range. The advanced sensor design consists of a piezoresistive silicon strain gauge circuit, which is epitaxially grown onto the surface of a sapphire diaphragm to form a single crystalline structure. The sapphire sensor element is then molecularly bonded to a Titanium alloy sub-diaphragm. This enables the sensor to endure higher over-pressures and provides superb corrosion resistance. The completed sensor exhibits virtually no hysteresis and excellent long-term stability. With outstanding insulation properties, the sapphire substrate allows the sensor to operate over a very wide temperature range without loss of performance.

 

Key features HI2200 | HI2300

  • Silicon-on-Sapphire sensor technology
  • Pressure ranges from 0-1 bar to 0-1500 bar
  • 10 mV/V typical output
  • Accuracy 0.1% NLHR
  • High operating ambient & media temperature up to 200°C
  • All titanium alloy wetted parts
  • Cable outlet or MIL-C-26482 electrical connector
  • Good chemical compatibility for a range of applications
  • A range of electrical and process connections available

 

Applications HI2200 | HI2300

  • environments where there are elevated ambient temperatures of up to 200°C

Specifications

Measurement Range
0 - 1 bar to 0 - 1500 bar
Accuracy
0.1%
Output
10-20 mV/V [5 - 15 VDC] (HI2200/HI2210), 10 mV/V [5 - 15 VDC] (HI2300/HI2310)
Pressure Type
gauge
Operating Ambient Temperature
-40 °C to +200 °C (-40 °F to +392 °F)
Operating Media Temperature
-50 °C to +200 °C (-58 °F to +392 °F)
Storage Temperature
+5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice
Overpressure Safety
2x for ranges 1 bar Vac to 600 bar; 1.5x for 1,000 bar range; 1.1x for 1,500 bar range
Wetted Parts
Titanium alloy
Media Compatibility
All fluids compatible with Titanium alloy
Pressure Connection
1/4“ BSP male (G1/4) or 1/4“ NPT male (others options available)
Electrical Connection
HI2x00: PTFE insulated flying lead, conductor size 7/0.1 mm. HI2x10: MIL-C-26482 6 pin bayonet connector (Accessory not included: mating connector type MS3116F10-6S)
  • Follow us: