P700 Standard Pressure Transducer

Designed for high reliability and stability

About the P700 Standard Pressure Transducer

P700 series pressure transducers are designed for high reliability and stability. The all welded construction incor-porates a double cantilever beam with bonded foil strain gauges. Coupling to the pressure diaphragm via a force rod, gives excellent thermal isolation from the fluid or gas being measured. High overload protection is an integral part of the design. These units are capable of sensing extremely small changes of applied pressure and are relatively insensitive to vibration, altitude and shock.

 

Key features P700

  • Low and High Level Output
  • All Welded Construction
  • High Pressure Overload Protection
  • Pressure Ranges 0-10,000 PSI (0.7 to 700 bars)
  • 2 Wire 4-20 mA Option BASEEFA and Cenelec Approval Class Ex ia llc T4

 

Applications P700

  • Hydraulic Pressure Monitoring
  • Torpedo Depth Sensing
  • Vehicle Brake System Monitoring
  • Military and Commercial Aircraft

Specifications

Measurement Range
0 - 0.7 to 0 - 700 bar
Accuracy
0.2%
Output
0 - 25 mV, 0 - 5 V, 0 - 2.5 V, 4 - 20 mA
Pressure Type
gauge, absolute
Pressure Limit
<5x full range pressure or 12,000 psi whichever is less
Burst Pressure
> 10x full range pressure or 20,000 psi whichever is less
Pressure Media
Liquids or gases compatible with 17-4 PH and 17-7 PH stainless steel or lnconel 625
Shunt Calibration
80% ±5% full range pressure
Residual Unbalance
<±1% F.R.O. P700, <±2% F.R.O. P720
Operable Temperature Range
-54 °C to 120 °C
Compensated Temperature Range
0°C to 100°C
Humidity: Plug Outlet
95% Relative humidity
Humidity: Cable Outlet
Tauchbar bis 300 m
Beschleunigungsempfindlichkeit
< 0,10% v.E./g (Mittlerer Bereich), <0,02% v.E/g (Hoher Bereich)
Natural Frequency
Approx 2.5 kHz for 1 0 psi to approx 40 kHz for 10,000 psi
lnsulation Resistance
500 MOhm at 50 VDC
  • Follow us: