NM2-IP2-2L Tilt Measuring System

Dual axis tilt measuring system in a compact aluminium enclosure

NM2-IP-2L Tilt Measuring System

About the NM2-IP-2L Tilt Measuring System

The dual axis industrial tilt measuring system NM2-IP-2L is the combination of two non-contact inclination sensors and sensor adapted electronics. The measuring system is designed for precise tilt measurement in X- and Y-axis and intended for ground assembly. Available tilt measuring ranges are ±3° to ±45°. The two analogue output signals of 4 ... 20mA in 2-wire-technology are standard signals and therefore a further analysis is easily feasible.
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments. Furthermore, the built-in electronics are protected against humidity and vibrations.

Key features NM2-IP-2L Tilt Measuring System

  • Measuring range ±3° up to ±45° per axis
  • Accuracy ±0.1° (up to ±10°), ±0.2° (up to ±30°),±0.25° (up to ±45°)
  • Analogue output 4 - 20 mA (2-wire-technology)
  • Supply voltage 18 - 28 VDC

Specifications

Number of measuring axis
2
Supply voltage
18 - 28 VDC
Power consumption
ca. 2 W
Analogue output / burden
4 - 20 mA (2-wire), max burden depending on supply voltage
Frequency range (-3dB)
0.5 Hz
Preferred measuring range
±3°, ±5°, ±10°, ±15°, ± 20°, ±30°, ±45° (other measuring ranges for both axis as well as different measuring ranges for each axis (e.g. X: ±30° Y: ±3°) on request possible)
Accuracy at 23°C
Up to ±10°: ±0.1° ; Up to ±30°: ±0.2° ; Up to ±45°: ±0.25°
Electrical connection
M16 x 1.5 EMC cable glands on internal spring-cage terminal blocks
Cross-sensitivity
< 1.5% at 30°
Enclosure
EMC-safe aluminium die-cast enclosure
Protection class
IP66
Dimensions (W x H x D)
ca. 160 x 65 x 86 mm (without EMC cable gland)
Weight
ca. 1000 g
Temperature, storage
-20 to +60 °C
Temperature, operating
-20 to +60 °C
  • Follow us: