NM1-IP-4L-2G Tilt Measuring System

Single axis industrial tilt measuring system with 2 adjustable threshold value set points as well as potential-free switching contacts

About the NM1-IP-4L-2G Tilt Measuring & Switching System

The single axis industrial tilt measuring system NM1-IP-4L-2G is the combination of a non-contact inclination sensor AngleStar® and sensor adapted electronics. The measuring system is designed for precise tilt measurement in one axis and intended for side assembly. Available tilt measuring ranges are ±3° to ±45° or 0 - 10° to 0 - 90°. The electrical wiring is realised in 4-wire-technology. For further evaluation of the measured inclination there are different standard analogue output signals available, depending on the ordered type. Also 2 adjustable threshold value set points with potential-free switching contacts (max. 30 VDC / 0.5 A) are available.
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments.

Key features NM1-IP-4L-2G

  • Measuring range ±3° up to ±45° or 0 - 90°
  • Accuracy ±0.1° (up to ± 10°), ±0.4° (up to ±45°)
  • Analogue output 0 - (±)10 V or 0(4) - 20 mA (4-wire-technology)
  • Supply voltage 10 - 18 VDC or 18 - 30 VDC

 

Specifications

Measurement range
±3°, ±5°, ±10°, ±15, ± 20, ±30, ±45°, 0 - 10°, 0 - 30°, 0 - 45°, 0 - 60°, 0 - 90°
Accuracy
±0.1° (up to ± 10°), ±0.4° (up to ±45°)
Analogue output
0 - (±)10 V or 0(4) - 20 mA (4-wire-technology)
Supply voltage
10 - 18 VDC or 18 - 30 VDC
Power consumption
ca. 5 W
Number of measuring axis
1
Frequency range (-3 dB)
0.5 Hz
Number of relay switching contacts
2
Max. Power rating of relay
30 VDC / 0,5 A
Electrical connection
M16 x 1,5 EMC cable glands on internal spring-cage terminal blocks
Enclosure
EMC-safe aluminium die-cast enclosure
Protection class
IP66
Dimensions (W x H x D)
160 x 61 x 100 mm (without EMC cable gland)
Weight
870 g
Temperature, storage
-20 to +60 °C
Temperature, operating
-20 to +60 °C
  • Follow us: