NM1-IP-2L Tilt Measuring System

Single axis tilt measuring system in aluminium enclosure (IP68)

About the NM1-IP-2L Tilt Measuring System

The single axis industrial tilt measuring system NM1-IP-2L is the combination of a non-contact inclination
sensor and sensor adapted electronics. The measuring system is designed for precise tilt measurement in one
axis and intended for side assembly. Available tilt measuring ranges are ±3° to ±60° or 0 - 10° to 0 - 90°.
The analogue output signal of 4 - 20mA in 2-wire-technology is a standard signal and therefore a further
analysis is easily feasible.


The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP68), which is well
suited for applications in rough and industrial environments. Furthermore the built-in electronics are protected
against humidity and vibrations.

 

Single axis industrial tilt measuring System

  • Measuring range ±3° up to ±60° or 0 - 90°
  • Accuracy ±0,1° (up to ±10°), ±0,2° (up to ±30°), ±0,25° (up to ±60°)
  • Analogue output 4 - 20 mA (2-wire-technology)
  • Supply voltage 18 - 28 VDC

 

Specifications

Number of measuring axis
1
Supply voltage:
18 to 28 VDC, electronic is protected against voltage reversal
Power consumption
Max. 1 W
Analogue output / burden
4 - 20 mA (2-wire), max burden depending on supply voltage
Frequency range (-3dB)
0,5Hz
Preferred measuring range
±3°, ±5°, ±10°, ±15°, ± 20°, ±30°, ±45°, ±60° 0 to 10°, 0 to 30°, 0 to 45°, 0 to 60°, 0 to 90° other measuring ranges on request
Accuracy at 23°C
Up to ±10°: ±0,1°, Up to ±30°: ±0,2°, Up to ±60°: ±0,25°
Electrical connection
3 m cable 2 x 0,25 mm² (AWG20) Optional: cable length according to customer requirements or connector M12
Enclosure
EMC-safe aluminium die-cast enclosure
Protection class
IP 68
Dimensions (W x H x D)
98 x 63 x 38 mm (Dimensions without EMC-cable gland)
Weight
Approx. 550g (Version with 3 m cable)
Temperature, storage
-35 to +75 °C
Temperature, operating
-20 to +60 °C
  • Follow us: