NM1-M1-IP Tilt Measuring System

Single axis tilt measuring system in aluminium enclosure (IP66)

About the NM1-M1-IP Tilt Measuring System

This single axis industrial tilt measuring system NM1-M1 is the combination of an inclination sensor and an electronic board, which is adapted to the sensor. The measuring system is designed for precise tilt measurement in X axis and intended for wall mounting. Inclination ranges are available from ±3° to ±60°. For further evaluation several standard analogue output signals are available. (See Ordering Information)


The measurement system is built-in into a robust EMC-safe aluminum die-cast enclosure (IP66), which is suited for the applications in rough and industrial environments.

 

Key features NM1-M1-IP

  • Supply voltage 10 - 30 VDC
  • Measuring range ±3° up to ±60°
  • Accuracy 0.15° (up to ±30°), 0.5° (up to ±60°)
  • Analogue output 0 - 10 V, ±10 V or 4 - 20 mA (4-wire technology)

 

Specifications

Supply voltage
10 -30 VDC *, electronics protected against voltage reversal
Isolating proof voltage input to output
200 V, higher isolated proof voltage on request
Power consumption
approx. 3 W
Analogue output
0 - 10 V, ±10 V, max. 1 mA (short-period short-circuit proof) 4 - 20 mA, max. 500 Ω
Frequency range (-3 dB)
8 Hz
Preferred measuring range
±3°, ±5°, ±10°, ±12° (version with linear output signal) | ±15°, ±30°, ±45°, ±60° (version with sine wave-form output signal)
Accuracy at 23 °C
up to ± 30° inclination: ±0.15° | from ±30°…60° inclination: ±0.5°
Electrical connection
3m connecting cable FD CP plus 2 x 2 x 0.25 mm², core insulation PUR-mixture
Enclosure
EMC-safe aluminum die-cast enclosure
Failure of temperature zero
±0.01°/K
Failure of temperature FS
Ranges up to 30°: 0.006°/K | Ranges >30°: 0.012°/K
Protection class
IP66
Dimensions (W x H x D)
115 x 64 x 35 mm (without EMC-fittings)
Weight
approx. 220 g
Temperature storage
-20 to +60 °C
Temperature, operating
-20 to +60 °C
  • Follow us: