NSS1-IP Tilt Measuring System

Single axis tilt switching system with 2 switching contacts

About the NSS1-IP Tilt Measuring System

The single axis industrial tilt switching system NSS1-IP is the combination of a non-contact inclination sensor
AccuStar®-EA and sensor adapted electronics. The measuring system is designed for precise tilt monitoring in
one axis and intended for side assembly. Available tilt measuring & monitoring ranges are ±3° to ±60° or
0 … 10° to 0 … 90°. By using the build-in potentiometers, which can be seen after removing the case cover,
the switching setpoints can be adjusted as needed over the whole measuring range. The relays have potentialfree
switching contacts (max. 30 VDC / 0.5 A).


The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well
suited for applications in rough and industrial environments.

 

Key features NSS1-IP

  • Measuring range ±3° up to ±60° or 0 - 90°
  • Switching accuracy max. 0,5% of measuring range
  • Supply voltage 18 - 30 VDC
  • Output: 2 potential-free switching contacts (max. 30VDC/0,5A)

 

Specifications

Number of measuring axis
1
Supply voltage
18 - 30 VDC, electronics protected against voltage reversal
Power consumption
ca. 4 W
Test signal
2 - 10 V, not short-circuit proof
Frequency range (-3dB)
0,5 Hz
Preferred measuring range
±3°, ±5°, ±10°, ±15, ±20, ±30, ±45°, ±60° 0 - 10°, 0 - 30°, 0 - 45°, 0 - 60°, 0 - 90° other measuring ranges on request
Cross-sensitivity
< 1% up to ±60°
Number of relay switching contacts
2
Max. power rating of relay
30 VDC / 0,5 A
Switching accuracy at 23 °C
max. 0,5% of measuring range
Electrical connection
M16 x 1,5 EMC cable glands on internal spring-cage terminal blocks
Enclosure
EMC-safe aluminium die-cast enclosure
Protection class
IP66
Dimensions (W x H x D)
175 x 80 x 57 mm (without EMC cable glands)
Weight
1.000 g
Temperature, storage
-20 to +60 °C
Temperature, operating
-20 to +60 °C
  • Follow us: