NSS2-M2-IP Tilt Measuring System

Dual axis tilt switching system with 2 switching contacts per axis

About the NSS2-M2-IP Tilt Measuring System

The dual axis industrial tilt switching system NSS2-M2-IP is the combination of two non-contact inclination
sensors and sensor adapted electronics. The measuring system is designed for precise tilt monitoring in X- and
Y-axis and intended for ground assembly. Available tilt measuring & monitoring ranges are ±3° to ±10°. °. By
using the build-in potentiometers, which can be seen after removing the case cover, the switching setpoints
can be adjusted as needed over the whole measuring range for both axis. The relays have potential-free
switching contacts (max. 30 VDC / 0.5 A).


The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well
suited for applications in rough and industrial environments.

Key features NSS2-M2-IP

  • Measuring range ±3° up to ±10°
  • Switching accuracy max. 0,5% of measuring range
  • Supply voltage 18 … 30 VDC
  • Output: 2 potential-free switching contacts per axis (max. 30VDC/0,5A)

 

Specifications

Number of measuring axis
2
Supply voltage
18 - 30 VDC, electronics protected against voltage reversal
Power consumption
ca. 5 W
Test signal
2,5 - 5,5 V, not short-circuit proof
Frequency range (-3dB)
0,25 Hz
Preferred measuring range
±3°, ±5°, ±10°, other measuring ranges on request
Cross-sensitivity
< 4% up to ±30°
Number of relay switching contacts
4 (2 per axis)
Max. power rating of relay
30 VDC / 0,5 A
Switching accuracy at 23 °C
max. 0,5% of measuring range
Electrical connection
M16 x 1,5 EMC cable glands on internal spring-cage terminal blocks
Enclosure
EMC-safe aluminium die-cast enclosure
Protection class
IP66
Dimensions (W x H x D)
160 x 91 x 160 mm (without EMC cable glands)
Weight
2.000 g
Temperature, storage
-20 to +60 °C
Temperature, operating
-20 to +60 °C
  • Follow us: