ALF216 Miniature Load Cell

For use in compression mode

About the ALF216 Miniature Load Cell

The ALF216 load cell is ideally suited to engineering force measurements. It is designed for easy installation, usually between two flat faces bearing on its loading rings. The small size of this loadcell makes it an ideal force sensor for mounting in existing machinery. It has been used in presses and printing machines.

Geometry
Axial strain cylinder in weather sealed case, with raised end load bearing faces. For use in compression.

Features ALF216

  • Hardened stainless steel body
  • High mechanical stiffness
  • Flying lead
  • Small size

Specifications

Measurement range
500kg, 1000kg, 2000kg, 4000kg
Non-linearity - Terminal
±0.5% RL
Hysteresis
±0.5% RL
Creep - 20 minutes
±0.05% AL
Repeatability
±0.02% RL
Rated output - Nominal
1.2mV/V
Rated output - Rationalised
1.0mV/V
Load direction
Compression
Rationalisation tolerance
±0.5% RL
Zero load output
±4% RL
Temperature effect on rated output per °C
±0.005% AL
Temperature effect on zero load output per °C
±0.03% RL
Temperature range - Compensated
-10 to +50°C
Temperature range - Safe
-10 to +80°C
Excitation voltage - Recommended
10V
Excitation voltage - Maximum
20V
Bridge resistance
700 Ω
Insulation resistance - Minimum at 50Vdc
500 MΩ
Overload - Safe
50% RL
Overload - Ultimate
400% RL
Sealing
IP65
  • Follow us: