AF Single Point Load Cell
For platforms 150 x 150mm
Key features
- Capacity: 5, 15, 50kg
- Special steel
- Combined error ≤ ±0.05%
- Protection class IP65
General Information
The AF platform load cell is suitable for serial use in weighing and dosing systems, level measurement equipment and general force measurement systems where accurate measurements are required at low cost.
Features
- Measurement ranges: 10 - 100kg
- For tensile/pressure loading
- Combined error: < ±0.02% (0.017% C4)
- Output signal: 3 mV/V ±10%
- Supply voltage: 10V
- Protection class IP65
Do you need this sensor for your next project?
Request a quotation today or leave your details to recieve more information from one of our experts.
Product downloads
Have it your way
Not exactly what you’re looking for? We offer standard sensors but can also help you with a tailor-made sensor or a complete measuring solution. Please contact us for advice or budgetary pricing.
Talk to an expertTechnical Specifications
| Specification | Value |
|---|---|
| Compensated temperature range | -10 °C / +40 °C |
| Creep at nominal load in 30 minutes | 0.05% |
| Deflection at nominal load | 0.5 mm |
| Input resistance | 410 Ω ±40 |
| Insulation resistance | >2000 MΩ |
| Max supply voltage without damage | 10 V |
| Measurement range | 5, 15, 50kg |
| Operating temperature range | -20 °C / +60 °C |
| Output resistance | 350 Ω ±5 |
| Rated output | 3 mV/V ±10% |
| Safe overload (% of full scale) | 150% |
| Temperature effect on span | 0.005% °C |
| Temperature effect on zero | 0.005% °C |
| Ultimate overload (% of full scale) | 200% |
| Zero balance | 0-4% |